CPA512

PA512 / SMPA512 Cascadable Amplifier 10 to 500 MHz Features • • • • HIGH POWER OUTPUT: +27.5 dBm (TYP.) HIGH THIRD ORDER I.P.: +39 DBm (TYP.) MODERTE NOISE FIGURE: 5.2 dB (TYP.) GaAs FET AMPLIFIER Rev. V1 Product Image Description The PA512 0.5 watt RF power amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This 2 stage GaAs FET transistor design uses a feedback loop for flat broadband performance. An active DC biasing network insures temperature-stable performance. MIL-STD-883 environmental screening is available. Ordering Information Part Number PA512 SMPA512 CPA512 Package TO-8 Surface Mount SMA Connectorized Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC Typical Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max) DC Current @ 15 Volts (max) mA Absolute Maximum Ratings Parameter Storage Temperature Case Temperature DC Voltage Continuous Input Power Short Term Input power (1 minute max.) Peak Power (3 µsec max.) “S” Series Burn-In Temperature (case) Guaranteed 0º to 50ºC -54º to +85ºC* 10-500 16.0 ±0.7 10-500 15.0 ±1.0 Units 25ºC MHz dB dB dB dB dBm dBm dBm dBm 10-700 18.0 ±0.3 24 5.2 27.5 +33 +45 +50 1.4:1 / 2.0:1 200 1.8:1 / 2.2:1 210 2.0:1 / 2.3:1 220 6.0 26.0 6.5 25.5 Absolute Maximum -62ºC to +150ºC +85ºC +17 V +17 dBm 100 mW 0.5 W +85ºC Thermal Data: VCC = +15 VDC Parameter Thermal Resistance θjc Transistor Power Dissipation Pd Junction Temperature Rise Above Case Tjc Rating ºC/W W ºC * Over temperature performance limits for part number CPA512, guaranteed from 0oC to +50oC only. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. PA512 / SMPA512 Cascadable Amplifier 10 to 500 MHz Typical Performance Curves at +25°C Gain Rev. V1 Outline Drawing: TO-8 * 19 Gain - dB 18 17 +25°C +85°C -54°C 16 5 50 150 250 Fr equency - MHz 350 450 600 VSWR 2.5 i nput out put VSWR 2 1.5 1 5 50 150 250 350 450 600 Fr equency - MHz WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: Surface Mount * No ise Figure Noise Figure dB 5 4 10 30 50 200 400 600 Frequency - MHz 6 P o wer Output @ 1dB Co mpressio n 40 Power Output dBm WEIGHT: 1 gram (0.04 oz.) max 30 Outline Drawing: SMA Connectorized * 20 10 5 50 Fr equency - MHz 200 400 600 Intercept P o ints 70 Intercept Point dBm 60 50 40 30 20 10 0 5 50 200 Fr equency - MHz IP2 2nd har m IP3 WEIGHT: 19 grams (0.67 oz.) max 400 600 ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.