ESMD-C50LTR

厂商：
MA-COM
封装：
描述：
ESMD-C50LTR - E-Series Surface Mount Mixer 80 - 2500 MHz - M/A-COM Technology Solutions, Inc.

数据手册：

下载ESMD-C50LTR.pdf

立即购买

详情介绍
数据手册
价格&库存

ESMD-C50LTR 数据手册

E-Series Surface Mount Mixer — 80 - 2500 MHz ESMD-C50L ESMD-C50L E-Series Surface Mount Mixer 80 – 2500 MHz Features • • • LO Power +10 dBm Up to +5 dBm RF Surface Mount SM-2 Package 0.031 Description M/A-COM’s ESMD-C50L is a Low Cost, Low Drive, Passive Double Double Balanced Mixer. Constructed using very broad band ferrite balun transformers and matched silicon schottky diodes, it’s performance is especially suited to high dynamic range receivers. Given it’s high 1dB compression point, the ESMD-C50L is also suitable for Transmitter upconversion at any frequency up to 2.5GHz. · Schematic Part Number ESMD-C50L ESMD-C50LTR Packaging Tube Tape and Reel Sigma (σ) — — 0.10 0.14 — — — — — — — — — — — — — — V2.00 S 1253 E Electrical Specifications @ +25°C Parameter Frequency Range 80 - 2500 MHz IF 1.0 dB Bandwidth = DC - 1000 MHz Conversion Loss L - R Isolation L - I Isolation R - I Isolation LO VSWR RF VSWR IF VSWR Input IP3 Input 1dB Compression 80 - 1000 MHz 1000 - 2500 MHz 80 - 1000 MHz 1000 - 2500 MHz 80 - 1000 MHz 1000 - 2500 MHz 80 - 1000 MHz 1000 - 2500 MHz 80 - 1000 MHz 1000 - 2500 MHz 80 - 1000 MHz 1000 - 2500 MHz DC - 600 MHz 200 - 1000 MHz 1000 - 2500 MHz Units — — dB dB dB dB dB dB dB dB — — — — — dBm dBm dBm Minimum — — — — 25.0 21.0 25.0 13.0 22.0 18.0 — — — — — 17.0 14.0 — Typical — — — — 33.5 30.4 30.2 19.1 26.6 22.9 1.55 1.38 1.42 1.85 1.41 21.5 19.82 +5.0 Maximum — — 7.8 9.0 — — — — — — 2.0 2.0 1.8 2.4 1.8 — — — Mean (x) — — 6.45 7.73 — — — — — — — — — — — — — — Test Conditions: LO Drive = +10dBm, IF frequency = 70MHz. Mean and Sigma calculated at 900MHz & 1800MHz. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make E-Series Surface Mount Mixer — 80 - 2500 MHz ESMD-C50L Absolute Maximum Ratings Parameter RF Input Power LO Drive Power Operating/Storage Temperature Absolute Maximum +17 dBm +17 dBm -40°C to +85°C Pin Configuration Function RF LO IF Ground Pin No. 1 2 3 4,5,6 Typical Performance @ +25°C Conversion Loss -2.00 -4.00 Conversion Loss (dB) -6.00 -8.00 + 10 dBm Isolation -10.00 -15.00 -20.00 Isolation (dB) LO to IF RF to IF -25.00 -30.00 -35.00 -40.00 -45.00 -50.00 10 220 430 640 850 1060 1270 1480 1690 1900 2110 2320 2530 -10.00 -12.00 -14.00 -16.00 80 280 480 680 880 1080 1280 1480 1680 1880 2080 2280 2480 2680 2880 LO to RF 2740 Frequency (M Hz) Frequency (MHz) VSWR IF Frequency (M Hz) 110 150 190 230 270 310 350 390 430 470 510 550 590 30 70 IIP3 & 1dB Compression 30.00 25.00 20.00 Power (dBm) 3.00 2.50 2.00 1.50 1.00 0.50 LO IF RF IIP3 15.00 10.00 5.00 0.00 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 1dB Compression Frequency (M Hz) RF & LO Frequency (M Hz) IF Bandwidth -3.00 -4.00 -5.00 Relative Power (dBm) -6.00 -7.00 -8.00 -9.00 -10.00 -11.00 30 150 250 350 450 550 650 750 850 390 IF Bandwidth (M Hz) IF Bandwidth (MHz) Note: Conversion Loss measured with fixed IF frequency of 70MHz. All measurements made with input power of +10 dBm. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. V2.00 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make 2950 S 1253 E E-Series Surface Mount Mixer — 80 - 2500 MHz ESMD-C50L Spurious Table: 1800MHz (In dBc below IF, assuming down conversion) nfLO - mfRF 0 1 RF (n) 2 3 4 X 21 54 69 82 0 -2 0 56 64 84 1 26 36 51 67 84 2 LO (m) RF = 1842.50 MHz, -5dBm LO = 1772.50 MHz, +10dBm IF = 70 MHz 25 18 46 65 82 3 32 50 60 62 83 4 Spurious Table: 900MHz (In dBc below IF, assuming down conversion) nfLO - mfRF 0 1 RF (n) 2 3 4 X 18 53 65 84 0 9 0 49 59 8 1 22 36 59 63 83 2 LO (m) RF = 970 MHz, -5dBm LO = 900 MHz, +10dBm IF = 70 MHz 23 12 49 65 83 3 32 36 51 64 82 4 Spurious Table: 1900MHz (In dBc below IF, assuming down conversion) nfLO - mfRF 0 1 RF (n) 2 3 4 X 21 28 33 49 0 RF = 1960 MHz, -5dBm LO = 1890 MHz, +10dBm IF = 70 MHz -4 0 36 31 51 1 22 27 22 35 3 2 LO (m) 23 13 44 35 51 3 29 41 42 37 52 4 V2.00 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. S 1253 E • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

下载 PDF

ESMD-C50LTR

1. 物料型号： - ESMD-C50L：管式封装。 - ESMD-C50LTR：胶带和卷轴封装。

2. 器件简介： - ESMD-C50L是M/A-COM公司生产的低成本、低驱动、被动双平衡混频器。使用非常宽带的铁氧体平衡变压器和匹配的硅肖特基二极管构建，特别适合高动态范围接收机。具有高达2.5GHz的频率和高1dB压缩点。

3. 引脚分配： - RF输入：1号引脚。 - 本地振荡器（LO）：2号引脚。 - 中频（IF）输出：3号引脚。 - 地（GND）：4、5、6号引脚。

4. 参数特性： - 频率范围：80-2500 MHz。 - 转换损耗：在80-1000 MHz为7.8 dB，在1000-2500 MHz为9.0 dB。 - L-R隔离：在80-1000 MHz为25.0 dB，在1000-2500 MHz为21.0 dB。 - L-I隔离：在80-1000 MHz为25.0 dB，在1000-2500 MHz为13.0 dB。 - R-I隔离：在80-1000 MHz为22.0 dB，在1000-2500 MHz为18.0 dB。 - LO电压驻波比（VSWR）：在80-1000 MHz为1.55，在1000-2500 MHz为1.38。 - RF电压驻波比（VSWR）：在80-1000 MHz为1.42，在1000-2500 MHz为1.85。 - IF电压驻波比（VSWR）：在DC-600 MHz为1.41。 - 输入三阶交调点（IP3）：在200-1000 MHz为17.0 dBm，在1000-2500 MHz为14.0 dBm。 - 输入1dB压缩点：+5.0 dBm。

5. 功能详解： - ESMD-C50L适用于高达2.5GHz的发射机上变频。 - 测试条件：LO驱动为+10dBm，IF频率为70MHz。

6. 应用信息： - 适用于高动态范围接收机和发射机上变频。

7. 封装信息： - 提供管式封装和胶带及卷轴封装两种形式。

ESMD-C50LTR 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“ESMD-C50LTR”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

ESMD-C50LTR

相关技术文章