ETC1-1T

ETC1-1T V10 E-Series RF 1:1 Flux Coupled Transformer 3 – 200 MHz Features • • • • 1:1 Impedance Ratio CT on Secondary Surface Mount Tape and reel packaging available SM - 22 Package Description M/A-COM’s ETC1-1T is a 1:1 RF flux coupled transformer in a low cost, surface mount package. Ideally suited for high volume applications. Parts are packaged in tape & reel. Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter RF Frequency Insertion Loss Amplitude Imbalance Phase Imbalance Input Return Loss Test Conditions — — — — — Frequency 3 - 200 3 - 200 3 - 50 3 - 200 3 - 50 3 - 200 3 - 200 5 - 120 Units MHz dB dB dB Degrees Degrees dB dB Min — — — — — — — — Typ — — — — — — — — Max — 1.5 0.1 0.5 1.0 5.0 10.0 15.0 Absolute Maximum Ratings 1 Parameter RF Power DC Current Operating Temperature Storage Temperature Ordering Information Part Number ETC1-1TTR Absolute Maximum 250 mW 240 mA 2 Package Tape and Reel (2000 piece Reel) -40°C to +85°C -55°C to +125°C 1. Operation of this device above any one of these parameters may cause permanent damage. 2. The maximum DC current applies to the secondary center tap in applications where the secondary is balanced. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. ETC1-1T V10 E-Series RF 1:1 Flux Coupled Transformer 3 – 200 MHz Pin Configuration Pin No. 1 2 3 4 5 Schematic Function Secondary Secondary CT Secondary Dot Primary Dot Primary 3 Secondary Dot Primary Dot 4 6 turns Primary 5 3 turns 2 Secondary CT 3 turns 1 Secondary Typical Performance Curves Insertion Loss 0.0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 0.0 50.0 100.0 150.0 200.0 Input Return Loss -10.0 -15.0 -20.0 dB Frequency (MHz) Phase Imbalance dB -25.0 -30.0 -35.0 0.0 50.0 Freq (MHz) 100.0 150.0 200.0 Amplitude Imbalance 185 183 0.05 0.00 -0.05 Degrees 181 dB 0 50 100 150 200 179 177 175 -0.10 -0.15 -0.20 -0.25 0.0 50.0 100.0 150.0 200.0 Freq (MHz) Freq (MHz) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.