ETC16-1T-2TR

ETC16-1T-2TR E-Series RF 1:16 Transformer 5-40 MHz Features • • • • • 1:16 Impedance Ratio CT on Secondary Surface Mount Tape and reel packaging available 260°C Reflow Compatible M/A-COM Products Advanced - Rev. V2 Product Image Description M/A-COM’s ETC16-1T-2TR is a 1:16 RF transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Typical applications include single to balanced mode conversion and impedance matching. The ETC16-1T-2TR is available in a SM-22 surface mount package. Parts are packaged in tape & reel. Ordering Information Part Number ETC16-1T-2TR Package Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter RF Frequency Insertion Loss Amplitude Imbalance Phase Imbalance Pin Configuration Min — — — — Test Conditions — — — — Frequency 5 - 40 5 - 40 22 5 - 40 5 - 40 Units MHz dB dB dB Degrees Typ — — — — Max — 1.0 0.8 0.3 3 Pin No. 1 2 3 4 5 Function Secondary Secondary CT Secondary Dot Primary Dot Primary Absolute Maximum Ratings Parameter RF Power DC Current Operating Temperature Storage Temperature Schematic Absolute Maximum 250 mW 240 mA2 -40°C to +85°C -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. ETC16-1T-2TR E-Series RF 1:16 Transformer 5-40 MHz Typical Performance Curves at +25°C Insertion Loss M/A-COM Products Advanced - Rev. V2 SM - 22 Package 0 -0.2 -0.4 -0.6 - 0.8 5 10 15 20 MHz 25 30 35 40 dB Amplitude Balance WEIGHT: 1 gram (0.04 oz.) max 0.04 0.02 0 -0.02 5 -0.04 -0.06 -0.08 MHz Phase Balance dB 10 15 20 25 30 35 40 ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. -179.4 -179.5 -179.6 -179.7 -179.8 -179.9 -180 5 10 15 20 MHz 25 30 35 40 Degree Input Return Loss 0 -10 dB -20 -30 -40 5 10 15 20 MHz 25 30 35 40 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.