FD26C

FD26 / FD26C / FD26E / SFD26 Frequency Doubler Rev. V2 Features • • • • INPUT: 50 TO 3300 MHz OUTPUT: 100 TO 6600 MHz INPUT DRIVE LEVEL +10 dBm (NOMINAL) HERMETICALLY-SEALED PACKAGE Product Image Description The FD26 is a passive bridge diode frequency doubler, designed for use in military, commercial and test equipment applications. The design utilizes Schottky bridge quad diodes and broadband soft dielectric and/or ferrite baluns to attain excellent performance. The use of high temperature solder assembly processes used internally makes it ideal for use in manual and semi-automated assembly. Environmental screening available to MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory. Ordering Information Part Number FD26 FD26C FD26E SFD26 Package TO-8 SMA Connectorized Flatpack Surface Mount Electrical Specifications: Z0 = 50Ω Pin = +10 dBm Typical Parameter Test Conditions Units +25ºC SSB Conversion Loss (max) fin = 5 to 400 MHz fin = 400 to 2500 MHz fin = 2500 to 3000 MHz fin = 3000 to 3300 MHz fin = 50 to 500 MHz fin = 500 to 3300 MHz dB dB dB dB dBc dBc 12.0 12.0 12.5 13.5 25 20 14.5 13.5 14.0 15.5 22 17 Guaranteed -54º to +85ºC* 15.0 14.0 14.5 16.0 20 15 Fundamental Suppression (min) Third Harmonic Suppression fin = 50 to 200 MHz fin = 200 to 3300 MHz fin = 50 to 2500 MHz fin = 2500 to 3300 MHz dBc dBc 25 19 1.5:1 2.0:1 22 17 20 15 Input VSWR * The FD26C specification limits apply at 0ºC to +50ºC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FD26 / FD26C / FD26E / SFD26 Frequency Doubler Rev. V2 Typical Performance Curves 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FD26 / FD26C / FD26E / SFD26 Frequency Doubler Rev. V2 Absolute Maximum Ratings Parameter Operating Temperature Storage Temperature Peak Input Power Absolute Maximum -54ºC to +100ºC -65ºC to +100ºC +23 dBm max @ +25ºC +20 dBm max @ +100ºC Outline Drawing: TO-8 * Outline Drawing: Flatpack * Weight: 2 grams (0.07 oz.) max Weight: 1 gram (0.04 oz.) max Outline Drawing: SMA Connectorized * Outline Drawing: Surface Mount * Weight: 21 grams (0.74 oz.) max Weight: 2 grams (0.07 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.