FD93

FD93 / FD93C Frequency Doubler Rev. V2 Features • • • • INPUT: 2 TO 9 GHz OUTPUT: 4 TO 18 GHz INPUT DRIVE LEVEL: +12 dBm (NOMINAL) HERMETICALLY-SEALED PACKAGE Product Image Description The FD93 is a passive bridge diode frequency doubler, designed for use in the high volume commercial and test equipment applications. The design utilizes Schottky bridge quad diodes and broadband baluns to attain excellent performance. The use of high temperature solder and welded assembly processes used internally makes it ideal for use in semi-automated and automated assembly. Environmental screening available to MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory. Ordering Information Part Number FD93 FD93C Package Versapac SMA Connectorized Electrical Specifications: Z0 = 50Ω Pin = +12 dBm Typical Parameter SSB Conversion Loss (max) Fundamental Suppression (min) Third Harmonic Suppression Input VSWR Guaranteed +25ºC -54º to +85ºC 13.5 14.5 16 Test Conditions fin = 2 to 4 GHz fin = 4 to 9 MHz fin = 2 to 9 GHz Units dB dB dBc 10.0 12.0 25 13.0 14.0 18 fin = 2 to 6 GHz fin = 2 to 9 GHz dBc 25 17 15 1.5:1 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FD93 / FD93C Frequency Doubler Rev. V2 Typical Performance Curves 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FD93 / FD93C Frequency Doubler Rev. V2 Absolute Maximum Ratings Outline Drawing: Versapac * Parameter Operating Temperature Storage Temperature Peak Input Power Absolute Maximum -54ºC to +100ºC -65ºC to +100ºC +23 dBm max @ +25ºC +20 dBm max @ +100ºC Weight: 8 grams (0.28 oz.) max Outline Drawing: SMA Connectorized * Weight: 29 grams (1.02 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.