FL05-0001-G-TR

FL05-0001-G Low Cost SMT High Pass Filter 800 – 3000 MHz Features • • • • • • Small Size and Low Profile Superior Repeatability Typical Insertion Loss 0.5 dB Typical Rejection 20 dB 2 Watt Power Handling SOIC-8 Package Rev. V2 Functional Block Diagram Description M/A-COM’s FL05-0001-G is an IC-based monolithic high pass filter in a low cost SOIC-8 plastic package. This filter is ideally suited for applications where small size, low cost, and low loss are required. Typical applications include base station switching networks and portable phones where size and PCB real estate are at a premium. Available in tape and reel. The FL05-0001-G is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Ordering Information Part Number FL05-0001-G FL05-0001-G-TR FL05-0001SAM Package Bulk Packaging 1000 piece reel Sample Test Board Pin Configuration Pin No. 1 2 Function GND RF IN GND GND Pin No. 5 6 7 8 Function GND GND RF OUT GND Note: Reference Application Note M513 for reel size information. 3 4 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FL05-0001-G Low Cost SMT High Pass Filter 800 – 3000 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Insertion Loss: 800 – 850 MHz 850 – 3000 MHz VSWR: 800 – 3000 MHz Rejection: DC-400 MHz Rev. V2 Units dB dB — dB Min — — — 15 Typ — 0.5 1.5:1 20 Max 1.2 1.0 1.8:1 — Absolute Maximum Ratings 1,2 Parameter Input Power Operating Temperature Storage Temperature Handling Procedures Please observe the following precautions to avoid damage: Absolute Maximum 2 W CW -40°C to +85°C -65°C to +150°C Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency VSWR vs. Frequency 0 2.0 -5 Insertion Loss (dB) 1.8 -10 -15 -20 -25 -30 1.0 0 500 Output VSWR 1.6 Input 1.4 1.2 1000 1500 2000 2500 3000 -35 0 500 1000 1500 2000 2500 3000 Frequency (MHz) Frequency (MHz) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FL05-0001-G Low Cost SMT High Pass Filter 800 – 3000 MHz Typical Performance Curves @ 25ºC Passband Insertion Loss vs. Frequency Insertion Loss at Edge of Passband vs. Frequency Rev. V2 0.0 0.0 Insertion Loss (dB) -0.4 -0.8 Insertion Loss (dB) 0 500 1000 1500 2000 2500 3000 -1.0 -2.0 -1.2 -3.0 -1.6 -4.0 -2.0 -5.0 500 600 700 800 900 1000 Frequency (MHz) Frequency (MHz) VSWR at Edge of Passband vs. Frequency Return Loss at Edge of Passband vs. Frequency 0.0 2.25 Output -6.0 2.00 Return Loss (dB) Output VSWR 1.75 Input -1 2.0 Input 1.50 -1 8.0 1.25 -24.0 1.00 500 -30.0 600 700 800 900 1000 0 500 1000 1 500 2000 2500 3000 Frequency (MHz) Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FL05-0001-G Low Cost SMT High Pass Filter 800 – 3000 MHz SOIC-8† Rev. V2 † Reference Application Note M538 for solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.