FMS-109-PIN

FM-107 / -108 / FMS-109 Broadband Frequency Doubler, 10—4800 MHz Output FP-2 (FM-107) Features n n n n n Rev. V5 Operates Over Full AMPS/PCN PCS/PHS Bands Low Conversion Loss Two Hermetic Package Options Typical Midband VSWR 1.5:1 High Fundamental and Third Order Suppression Description TO-8-1 (FM-108) SF-1 (FMS-109) 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 considering for development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make not guaranteed. changes to the product(s) or information contained herein without notice. FM-107 / -108 / FMS-109 Broadband Frequency Doubler, 10—4800 MHz Output Electrical Specifications: TA = 25°C, Input Frequency: 5-2400 MHz, Output Frequency: 10-4800 MHz, Input Power: +10 dBm Parameter Conversion Loss F1 Suppression Test Conditions Input: +10 dBm Input: +10 dBm 5-750 MHz 750-1000 MHz 1000-2400 MHz 15-1500 MHz 1500-3000 MHz 3000-7200 MHz Frequency Units dB dB dB dB dB dB dB Ratio dB Min. — 30 25 20 35 25 20 — — Typ. 11 40 30 25 40 35 25 1.5:1 27 Max. 13 — — — — — — 2.0:1 — Rev. V5 F3 Suppression Input: +10 dBm VSWR Loss as Quadrupler Input: +10 dBm Input: +10 dBm Pin Configuration (FM-107) Pin No. 1 2 3 4 Function GND GND GND RF IN Pin No. 5 6 7 8 Function GND GND GND RF OUT Pin Configuration (FMS-109) Pin No. 1 2 Function GND RF OUT Pin No. 3 4 Function GND RF IN Absolute Maximum Ratings 1 Parameter Absolute Maximum Max Input Power 2 Pin Configuration (FM-108) Pin No. 1 2 Function RF IN N/C Pin No. 3 4 Function RF OUT GND Total Power 300 mW Max. Derated to 85°C @ 3.2 mW/°C 1. Operation of this device above any one of these parameters may cause permanent damage. 2. Ambient Temperature (TA) = +25°C 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 considering for development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make not guaranteed. changes to the product(s) or information contained herein without notice. FM-107 / -108 / FMS-109 Broadband Frequency Doubler, 10—4800 MHz Output Typical Performance Curves Conversion Loss vs. Input Freq. 70 60 50 40 Rev. V5 Spurious Response: F3 Suppression 18 16 14 12 30 10 20 8 6 0.00 10 0.05 0.25 0.75 1.25 1.75 2.10 Inp ut F req uency ( GHz ) 2.40 3.00 0 F r eq uency ( GHz ) Spurious Response: F1 Suppression 50 45 40 35 30 25 20 15 0.00 0.10 1.00 1.50 2.00 2.20 Inp ut F req uency ( GHz) 2.75 40 35 30 25 20 15 Loss as a Quadrupler 10 0.20 2.00 4.00 F req uency ( GHz ) 6.00 8.00 Ordering Information Part Number FM-107-PIN FM-108-PIN FMS-109-PIN Package Hermetic Flatpack Package (FP-2) Hermetic Package (TO-8-1) Hermetic Surface Mount package (SF-1) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 considering for development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make not guaranteed. changes to the product(s) or information contained herein without notice.