HH-106PIN

HH-106 / -107 180o Hybrid Junction, 2 - 200 MHz Rev. V3 Features • 0° - 180° Hybrid with Symmetrical Time Delay Between Ports • Available in Flatpack and Connectorized Packages • MIL-STD-202 Screening Available FP-2 (HH-106) Description 3 dB Hybrids are ideal for dividing a signal into two signals of equal amplitude and a constant 90° or 180° phase d i ff e r e n t i a l and for Q u a d r a tu r e combining or performing summation/differential combining. C-8-107 (HH-107) Pin Configuration (HH-106) Pin No. 1 2 3 4 Function A GND GND C Pin No. 5 6 7 8 Function B GND GND D Functional Diagram 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. HH-106 / -107 180o Hybrid Junction, 2 - 200 MHz Rev. V3 Electrical Specifications1: TA = -55°C to +85°C Parameter Insertion Loss Isolation Test Conditions Less Coupling A-B C-D Amplitude Balance VSWR Phase Balance Impedance Input Power — — — — — Frequency 2 - 200 MHz 2 - 200 MHz 5 - 50 MHz 2 - 200 MHz 5 - 50 MHz 2 - 200 MHz 2 - 200 MHz 5 - 50 MHz 2 - 200 MHz 2 - 200 MHz 2 - 200 MHz Units dB dB dB dB dB dB Ratio Ratio ° Ohms Watts Min — 25 30 30 35 — — — — — — Typ — — — Max 1.0 — — — — — — 50 — 0.3 1.5:1 1.3:1 3 — 1 1. All specifications apply with 50 ohm source and load impedance. Typical Performance Curves Ordering Information Part Number HH-106 PIN HH-107 BNC HH-107 SMA Package FP-2 C-8-107 C-8-107 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.