HH-109

HH- / HHS-109 Hybrid Junction, 5 - 200 MHz Rev. V3 Features • 0° - 180° Hybrid with High Isolation • Usable from 500 KHz - 500 MHz • MIL-STD-202 Screening Available FP-2 (HH-109) Description 3 dB Hybrids are ideal for dividing a signal into two signals of equal amplitude and a constant 90° or 180° phase differential and for Quadrature combining or performing summation/differential combining. SF-1 (HHS-109) Pin Configuration (HH-109) Pin No. 1 2 3 4 Function A GND GND C Pin No. 5 6 7 8 Function B GND GND D Functional Diagram C 0° A 180° Hybrid Magic Tee 0° B 0° Pin Configuration (HHS-109) Pin No. 1 2 Function A C Pin No. 3 4 Function B D D 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. HH- / HHS-109 Hybrid Junction, 5 - 200 MHz Rev. V3 Electrical Specifications1: TA = -55°C to +85°C Parameter Insertion Loss Isolation Amplitude Balance VSWR Phase Balance Impedance Input Power — — — — — Test Conditions Less Coupling Frequency 5 - 200 MHz 5 - 100 MHz 100 - 200 MHz 5 - 200 MHz 5 - 100 MHz 100 - 200 MHz 5 - 100 MHz 100 - 200 MHz — — Units dB dB dB dB Ratio Ratio ° ° Ohms Watts Min — 30 25 — — — — — — — Typ — — — — — — — — 50 — Max 1.4 — — 0.3 1.5:1 1.7:1 4 8 — 0.5 1. All specifications apply with 50 ohm source and load impedance. Typical Performance Curves Insertion Loss P orts A- C, A- D 3 Isolation P orts A- B, C- D 60 50 2 40 1 30 0 0.5 1.0 2.0 5.0 10.0 20.0 50.0 100.0 200.0 500.0 20 1 1 2 5 10 20 50 100 200 500 Frequency (MHz) Frequency (MHz) VSWR Ordering Information All P orts 3.00 Part Number 2.50 Package FP-2 SF-1 HH-109 PIN 2.00 HHS-109 PIN 1.50 1.00 0.5 1.0 2.0 5.0 10.0 20.0 50.0 100.0 200.0 500.0 Frequency (GHz) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.