LPAD0622-FC

MTS - LDI 4 Olsen Avenue Edison, NJ 08820 USA Voice (732) 549-9001 Fax: (732) 906-1559 Internet: www.laserdiode.com Email: sales@laserdiode.com Laser Diode Incorporated ISO 9001:2000 Certified PINAMP Mini-DIL Optical Receivers 4Mb/s, 52Mb/s, 155Mb/s & 622Mb/s High sensitivity/Wide dynamic range High responsivity and low dark current InGaAs pin detector Single Supply Capable Hermetic Package GR-468-CORE Telcordia Qualified Applications Include: Supervisory channel, Long haul transmission networks, Short haul transmission networks, DWDM transponders, SDH/SONET single mode applications, Instrumentation and testing, Data communications. Specifications and Limits Performance @ 25oC (+ / - 5.0 VDC) PARAMETER UNIT min Data Rate Sensitivity @ 10 (BER)* Overload @ -5 VDC Transfer Gain @ 1310nm Dark Current @ -5 VDC Responsivity @ -5 VDC @1310 nm @1550 nm Output Impedance Supply Voltage Supply Current -9 4 Mb/s typ 4 -50 -4 40K 0.5 -48 max min 52Mb/s typ 52 -43 0 25K 0.5 -41 max min 155 Mb/s typ 155 -39 0 12K 0.5 -37 max min 622 Mb/s typ 622 -33 0 4K 0.5 -31 max Mb/s dBm dBm V/W nA A/W A/W A/W Ohms V mA 30 4.75 0.85 0.9 60 5.25 30 30 4.75 0.85 0.9 60 5.25 30 30 4.75 0.85 0.9 60 5.25 30 30 4.75 0.85 0.9 60 5.25 30 *Sensitivity is calculated using the noise voltage measured at 25oC at the output of a 3-pole Butterworth filter. Sensitivity is specified as the average optical power in dBm measured at 1310nm and Ta = 25oC for a BER of 10-9. Fiber Specifications Fiber Type Index Profile N/A Nominal Size (um) 50/125/245/900 Cladding Tolerance (um) 125 +/-2.0 900 um Buffer Material Fiber Yield Strength (N) 10 Fiber Bend Radius min. (mm) 30 Multimode tight buffer Graded 0.2 Hytrel Other fiber types are available. Please contact the Laser Diode Sales Department or your local LDI representative. LDI Document #10-4400-0003 Rev. C 1/12/09 Outline Drawing Outline PIN ASSIGNMENT Pin No. Description 1 -5 Volt Det Bias* 2, 3, 5, 6, 8 Gnd 4 Output 7 +5 Volts *0V Det Bias Capable Dimensions: inches [mm] Detailed package drawing is available upon request Absolute Maximum Ratings Units Operating Temperature Storage Temperature Positive Supply Voltage Detector Bias Soldering time at 260°C LPAD Series °C °C V V secs -40 to +85 -40 to +85 +5.5 -10 10 Part Numbering Diagram Mini-DIL Pinamps 4Mb/s, 52Mb/s, 155Mb/s, 622Mb/s LPAD Package Type EXAMPLE: LPAD 0622-FC 0XXX Data Rate - XX Connector Type R RoHS Designator Mini-DIL Pinamp at 622 Mb/s with FC connector Products can be ordered directly from Laser Diode Inc. or its representatives. For a complete listing of representatives, visit our website at www.laserdiode.com Personal Hazard and Handling Precautions: Handle optical fiber with normal care, avoiding stretch, tension, twist, kink or bend abuse. ESD precautions apply. When ordering, refer to the numbering diagram above. Warranty: Please refer to your product purchase agreement for complete details or check with your Laser Diode sales representative. Notice: Laser Diode Inc. reserves the right to make changes to the products or information contained herein without notice. No liability is assumed as a result of their use or application. LDI Document #10-4400-0003 Rev. C 1/12/09