M14A

M14A Double-Balanced Mixer Rev. V2 Product Image Features • • • • • • • LO 4 TO 16 GHz RF 6 TO 14 GHz IF DC TO 2 GHz LO DRIVE: +7 dBm (nominal) HIGH ISOLATION: 35 dB (TYP.) LOW VSWR: < 2.0:1 (TYP.) LOW NOISE FIGURE: < 6.0 dB (TYP.) Description The M14A is a double balanced mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky ring quad diodes and broadband soft dielectric and ferrite baluns to attain excellent performance. This mixer can also be used as a phase detector and/or bi-phase modulator since the IF port is DC coupled to the diodes. The use of high temperature solder and welded assembly processes used internally makes it ideal for use in manual, semi-automated assembly. Environmental screening available to MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory. Ordering Information Part Number M14A Package SMA Connectorized Electrical Specifications: Z0 = 50Ω Lo = +7 dBm (Downconverter Application only) Typical Parameter Test Conditions Units 25ºC SSB Conversion Loss & SSB Noise Figure (max) fR = 6 to 9 GHz , fL = 5 to 10 GHz , fI = 0.05 to 1 GHz fR = 6 to 14 GHz, fL = 4 to 16 GHz, fI = 0.05 to 2 GHz fL = 4 to 12 GHz fL = 12 to 16 GHz fL = 4 to 6 GHz fL = 6 to 12 GHz fL = 12 to 16 GHz fL @ +7 dBm dB dB dB dB dB dB dB dBm 5.5 7.5 35 28 17 35 40 +2 Guaranteed 0º to 50ºC 8.0 9.0 20 15 12 23 28 -54º to +85ºC 8.5 9.5 18 13 10 21 26 Isolation, L to R (min) Isolation, L to I (min) 1 dB Conversion Compression Input IP3 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. M14A Double-Balanced Mixer Rev. V2 Typical Performance Curves 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. M14A Double-Balanced Mixer Rev. V2 Absolute Maximum Ratings Parameter Operating Temperature Storage Temperature Peak Input Power Peak Input Current Outline Drawing: SMA Connectorized Absolute Maximum -54 C to +100ºC -65ºC to +100ºC +23 dBm max @ +25ºC +20 dBm max @ +100ºC 100 mA DC 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.