MAMDCC0002

MAMDCC0002 Vector Modulator, 1.805 to 1.88 GHz (DCS) and 1.93 to 1.99 GHz (PCS) Features • • • • • • Operates 1.805 to 1.88 GHz (DCS) Operates 1.93 to 1.99 GHz (PCS) Low Amplitude Ripple Linear Phase 50 Ohm Nominal Impedance Continuously Variable Across a Full 360 degree range • Test Boards Available • 4x6 mm PQFN Package Rev. V3 Functional Schematic Description M/A-COM's MAMDCC0002 is a Vector Modulator that significantly reduces the required board space compared to hybrid solutions. The monolithic passive elements will lead to greater repeatability lot-tolot. Low amplitude ripple will provide superior performance. High intercept and compression points will contribute to more linear system performance. MAMDCC0002 is ideally suited for wireless infrastructure applications. Pin Configuration Pin No. 1 2 Function NC NC NC NC NC NC NC NC BIAS 1A NC GND RF IN GND NC BIAS 2A NC Pin No. 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Function NC NC NC NC NC NC NC BIAS 2B NC GND RF OUT GND NC BIAS 1B NC NC M/A-COM’s MADRCC0002 Dual Linearizer is designed to simplify the control of Vector Modulators. See Figure 1 and App Note AN3001. 3 4 5 6 7 8 9 10 11 Ordering Information Part Number MAMDCC0002 MAMDCC0002TR MAMDCC0002-DC000 12 13 Package Bulk Packaging 1000 piece reel Sample Test Board 14 15 16 Note: Reference Application Note M513 for reel size information. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMDCC0002 Vector Modulator, 1.805 to 1.88 GHz (DCS) and 1.93 to 1.99 GHz (PCS) Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Frequency Impedance Reference Loss Attenuation Range Phase Shift Range Amplitude Ripple Rev. V3 Test Conditions DCS Band PCS Band — Z = 50 Ohms Z = 50 Ohms Above Reference Loss Z = 50 Ohms, Over minimum Attenuation Range Z = 50 Ohms, Ref Loss Z = 50 Ohms, 5 dB above Ref Loss Z = 50 Ohms, 10 dB above Ref Loss Z = 50 Ohms, Ref Loss Z = 50 Ohms, 5 dB above Ref Loss Z = 50 Ohms, 10 dB above Ref Loss Over 10 dB Attenuation Range Over 10 dB Attenuation Range Over 10 dB Attenuation Range Over 10 dB Attenuation Range 50% Control to 10% / 90% RF — Units GHz GHz Ohms dB dB deg dB dB dB deg deg deg dB dB dBm dBm dB ns mA Min 1.805 1.93 — -12.5 10 0 — — — — — — 15 14 — — — — — Typ — — 50 — — — ±0.07 ±0.07 ±0.09 ±0.15 ±0.25 ±0.15 — — +41 +29 — 500 — Max 1.88 1.99 — -10.0 — 360 ±0.15 ±0.20 ±0.20 ±0.5 ±0.5 ±0.5 — — — — Note 1 — 25 Deviation from Linear Phase Return Loss - Input Return Loss - Output Input IP3 Input P1dB Noise Figure Switching Speed I Supply 1. Noise figure is approximately equal to the absolute attenuation. Recommended PCB Configuration Absolute Maximum Ratings 2,3 Parameter Max. Input Power 1.7 to 2.1 GHz Other Frequencies DC Voltages4 Vbias1 or Vbasis2 DC Current Operating Temperature Storage Temperature Absolute Maximum +30 dBm +24 dBm +1.0V 50 mA Max per Bias -40°C to +85°C -65°C to +125°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. Note that external dropping resistors are required to limit the current and voltage on the PIN diodes. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMDCC0002 Vector Modulator, 1.805 to 1.88 GHz (DCS) and 1.93 to 1.99 GHz (PCS) Phase and Attenuation of MAMDCC0002, Vector Modulator Linearized with MADRCC0002 Dual Linearizer5,6,7,8 Figure 1A (y) 90° Rev. V3 45° bias 2 = 5.0V 3.5V 3.0V bias 1 = 0.0V 0.5V 1.0V 1.5V 2.0V 2.5V 3.0V 3.5V bias 1 = 5.0V 2.5V 2.0V 1.5V 1.0V 0.5V bias 2 = 0.0V (x) 0° Figure 1B (y) 90° bias 1 = 0V bias 2 = +5V 45° bias 1 = 0V bias 2 = 0V (x) 0° Loss = 21.5 dB Loss = 16.5 dB Loss = 11.5 dB bias 1 = +5V bias 2 = +5V bias 1 = +5V bias 2 = 0V Reflection coefficient = 0.6 5. Tic marks on x,y axes refer to reflection coefficient in increments of 0.1V. Reflection coefficients vary from -0.6 to +0.6 on both the x and y axes. 6. Data is for vector modulators driven by linearizers. See Application Note AN3001. 7. Inputs to the linearizers vary from 0 to 5V. 8. The phase with the inputs to both linearizers set to +5V is arbitrarily called zero degrees. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMDCC0002 Vector Modulator, 1.805 to 1.88 GHz (DCS) and 1.93 to 1.99 GHz (PCS) Phase and Attenuation of MAMDCC0002 Vector Modulator with Current Drive9,10 Figure 2A (y) 90° Rev. V3 45° bias 2 = 1.7 mA 140 µA 110 µA bias 1 = 0 µA 3 µA 12 µA 29 µA 51 µA 76 µA 104 µA 138 µA bias 1 = 1.6 mA 79 µA 51 µA 29 µA 13 µA 4 µA bias 2 = 0 µA (x) 0° Figure 2B (y) 90° bias 1 = 0 µA bias 2 = 1.7 mA 45° bias 1 = 0 µA bias 2 = 0 µA (x) 0° Loss = 21.5 dB Loss = 16.5 dB Loss = 11.5 dB bias 1 = 1.6 mA bias 2 = 1.7 mA bias 1 = 1.6 mA bias 2 = 0 µA Reflection coefficient = 0.6 9. Tic marks on x,y axes refer to reflection coefficient in increments of 0.1. Reflection coefficients vary from –0.6 to +0.6 on both the x and y axes. 10.The phase with the inputs to both linearizers set to +15 mA is arbitrarily called zero degrees. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMDCC0002 Vector Modulator, 1.805 to 1.88 GHz (DCS) and 1.93 to 1.99 GHz (PCS) Schematic with Off-Chip Components Handling Procedures Please observe the following precautions to avoid damage: BIAS_1 Rev. V3 Static Sensitivity 1A 1B MA MD CC00 02 R F_IN V ECTOR MODU LATO R 2A 2B RF_OUT BI AS_2 Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity NO TES CAP ACITORS ARE 10 0 PF IN DUC TOR S AR E COILCR AFT 060 3C S-27N X-BC OR E QU IVAL ENT The MSL rating for this part is defined as Level 2 per IPC/JEDEC J-STD-020. Parts shall be stored and/or baked as required for MSL Level 2 parts. CSP-6, 4 x 6 mm, 32-lead, PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.