MAMO-000900-1291MB

MAMO-00900-1291MT I/Q Modulator/Demodulator 850-960 MHz Features • • • • • • • Excellent Carrier Suppression ~40 dBc 6.0 dB Typical Modulator Conversion Loss +10 to +14 dBm LO Drive High 3x1 and 5x1 Harmonic Suppression No External Matching Required Low Cost Miniature Plastic MLP Package Lead Free and RoHS Compliant Rev. V4 MLP 6mm Package Circuit Side View P IN 28 PI N Q P IN 2 2 P IN 1 P I N 21 PIN L O Description and Application M/A-COM's MAMO-000900-1291MT is a silicon monolithic 850-960 MHz, medium barrier, I/Q Modulator/Demodulator. Encapsulated in a low cost, miniature surface mount PQFN 6mm square, 28lead plastic package the die utilizes M/A-COM’s unique HMIC silicon/glass process. This process enables the realization of low loss passive elements and efficient diode technology which in turn provides excellent harmonic suppression. In addition, the incorporated monolithic design techniques provide unparalleled amplitude and phase imbalance performance during demodulation thus adding to the unit’s overall versatility. These modulators/demodulators are well suited for GSM and CDMA Cellular basestation applications, as well as most RFID systems, particularly where small size and high performance are required. Typical applications include quadrature modulation requirements in wireless receivers and transmitters. P IN 7 PIN 29 AREA GND P IN RF P I N 15 PI N 8 PI N I P IN 14 PIN Configuration3 PIN 1 2 3 4 5 6 7 8 9 10 11 Function GND GND GND LO GND GND GND GND GND GND I GND GND GND PIN 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Function GND GND GND RF GND GND GND GND GND GND Q GND GND GND Absolute Maximum Ratings1,2 Parameter Operating Temperature Storage Temperature Incident LO Power Incident RF Power 12 13 14 3. Maximum Ratings -40 °C to +85 °C -65 °C to +150 °C +20 dBm C.W. +20 dBm C.W. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) Ordering Information Part Number MAMO-000900-1291MT MAMO-000900-1291MB Package Tape and Reel Sample Test Board 1. Exceeding these limits may cause permanent damage. 2. M/A-COM does not recommend sustained operation near these survivability limits. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMO-00900-1291MT I/Q Modulator/Demodulator 850-960 MHz Electrical Specifications (Modulator): TA = 25ºC, Z0 = 50Ω Parameter Output Power Frequency Range 900 MHz 850-960 MHz 850-960 MHz Test Conditions LO Drive = +12 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO - 0.4 MHz LO Drive = +12 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO - 0.4 MHz LO Drive = +12 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO + 0.4 MHz LO Drive = +12 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO + 1.2 MHz LO Drive = +12 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO + 2.0 MHz LO Drive = +12 dBm BB AC Voltage = 275mVp-p LO Drive = +12 dBm I/Q Power level = -7 dBm LO Drive = +12 dBm I/Q Power level = -7 dBm FRF = FLO + 0.4 MHz LO Drive = +12 dBm I/Q Power level = -7 dBm FRF = FLO + 0.4 MHz LO Drive = +12 dBm I/Q Power level = -7 dBm Units dBm Min -14 -14.5 32 Typ -13.3 -13.4 40 Max - Rev. V4 LO Carrier Suppression SSB Rejection4 dBc 850-960 MHz dBc 28 35 - 3 x 1 Harmonic Suppression 5 x 1 Harmonic Suppression ACPR CDMA 20005 Output Noise Floor LO Port Return Loss 850-960 MHz dBc 48 58 - 850-960 MHz dBc 74 83 - 900 MHz Carrier Freq 850-960 MHz 850-960 MHz dBc dBm/Hz dB 72 20 74 -160 26 - RF Port Return Loss 850-960 MHz dB 6 9 - IF Bandwidth 850 ≤ LO ≤ 970 MHz MHz 65 - - 4. When the LO frequency is greater than the RF frequency, the upper sideband is suppressed. 5. The Baseband I and Q input signals were generated using the following settings in the Agilent E3844C Vector Signal Generator: FWD CDMA2000 SR1 Pilot Filter: IS-95 Mod w/EQ Link: Forward IQ Mod Filter: Through PRE Clip: 100.0 % 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMO-00900-1291MT I/Q Modulator/Demodulator 850-960 MHz Modulator Band Performance 850-960 MHz 0 -10 Rev. V4 Carrier Suppression, SSB Rejection, 3rd Harmonic, 5th Harmonic (dBc) -20 -30 -40 -50 -60 -70 -80 -90 -100 850 860 870 880 890 900 910 920 930 940 950 960 5th HARMONIC 3rd HARMONIC CARRIER SUPPRESSION SSB REJECTION FREQUENCY (MHz) Modulator/Demodulator Return Loss 850-960 MHz 0 -5 R Port Return Loss (dB) -10 -15 -20 L Port -25 -30 -35 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMO-00900-1291MT I/Q Modulator/Demodulator 850-960 MHz Output Power 850-960 MHz -10 -11 -12 -13 -14 -15 -16 -17 -18 850 860 870 880 890 900 910 920 930 940 950 960 Rev. V4 Output Power (dBm) FREQUENCY (MHz) Output Noise Floor -100 Output Noise Floor (dBm/Hz) -120 -140 Device Output Noise Contribution -160 System Noise Floor -180 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMO-00900-1291MT I/Q Modulator/Demodulator 850-960 MHz Rev. V4 Electrical Specifications (Demodulator) @ +25 °C, Z0 = 50Ω Parameter Conversion Loss Frequency Range 900 MHz 850-960 MHz Test Conditions LO Drive = +12 dBm RF Input = -7 dBm FRF = FLO + 0.4 MHz LO Drive = +12 dBm RF Input = -7 dBm FRF = FLO + 0.4 MHz LO Drive = +12 dBm RF Input = -7 dBm FRF = FLO + 0.4 MHz LO Drive = +12 dBm RF Input = -7 dBm (each tone) Tone 1 is 10 MHz above LO Freq Tone 2 is 11 MHz above LO Freq LO Drive = +12 dBm FRF = FLO + 0.4 MHz 850 MHz ≤ LO ≤ 970 MHz FRF = FLO + FIF; 0 ≤ FIF ≤ 65 MHz LO Drive = +12 dBm RF Input = -7 dBm FRF = FLO + 0.4 MHz LO Drive = +12 dBm RF Power Level = -7 dBm FRF = FLO + 0.4 MHz Units dB Min Typ 12.0 12.5 Max 13 14 Amplitude Imbalance 850-960 MHz dB - 0.13 0.3 Phase Imbalance6 Input IP3 850-960 MHz deg - 1.9 4.0 850-960 MHz dBm 27 28.4 - Input 1dB Compression IF Bandwidth LO Return Loss 900 MHz 850-960 MHz 850-960 MHz dBm MHz dB 10 65 20 11.2 26 - RF Return Loss 850-960 MHz dB 6 9 - 6. When the LO frequency is greater than the RF frequency, the “Q” output leads the “I” output by 90 degrees nominal. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMO-00900-1291MT I/Q Modulator/Demodulator 850-960 MHz Demodulator Conversion Loss 850-960 MHz -8 Rev. V4 Demodulator Conversion Loss (dBm) -9 -10 -11 PLO = 10dBm -12 -13 PLO = 12dBm PLO = 14dBm -14 -15 -16 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) Demodulator Input IP3 and Input 1dB Compression 850-960 MHz 35 IIP3 @ 14dBm LO IIP3 (dBm), Input 1dB Compression (dBm) 30 25 IIP3 @ 12dBm LO IIP3 @ 10dBm LO 20 15 Input 1dB Compression 10 5 0 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMO-00900-1291MT I/Q Modulator/Demodulator 850-960 MHz Demodulator Phase and Amplitude Imbalance 850-960 MHz 2.5 Phase Imbalance @ 12 dBm LO 0.25 Rev. V4 Phase Imbalance (Degrees) 2 Amplitude Imbalance @ 12 dBm LO 1.5 0.2 Amplitude Imbalance (dB) 0.15 1 Amplitude Imbalance @ 14 dBm LO 0.1 0.5 Phase Imbalance @ 14 dBm LO 0 0.05 0 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) MAMO-000900-1291MT Outline – 6mm PQFN, 28-Lead 7 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.