MAMXES0108

E-Series Mixer, 0.5 - 500 MHz V 2.00 MAMXES0108 Features n n n n SM89 Up to +1dBm RF Small SMT footprint +5 dBm LO Drive Low Profile Description M/A-COM’s MAMXES0108 is a Low Cost, Broadband, high performance Double Balanced Mixer designed for use in high volume wireless applications. The device has been optimised by careful selection of the Schottky Diode and Balun Transformer for excellent performance. MAMXES0108 is available in an SM-89 surface mount package and reflows using standard soldering Pin Configuration Pin No. 1 2 3 Function LO GND GND Pin No. 4 5 6 Function RF IF GND Absolute Maximum Ratings 1 Parameter RF Power Peak IF Current Operating Temperature Storage Temperature Absolute Maximum 50mW 40 mA -55°C to +100°C -55°C to +100°C 1. Operation of this device above any one of these parameters may cause permanent damage. Electrical Specifications: TA = 25°C, Impedance = 50 Ohms, LO Drive = +5 dBm Parameter Frequency Range Frequency (MHz) RF: 0.5-500 LO: 0.5-500 IF: DC-500 1-250 0.5-500 0.5-5 5-250 250-500 0.5-5 5-250 250-500 Units — — — dB dB dB dB dB dB dB dB dBm Minimum — — — — — 50 35 30 45 35 25 — Typical — — — 6.0 6.2 55 45 35 55 45 30 — Maximum — — — 7.5 7.8 — — — — — — +1 Conversion loss L-R Isolation L-I Isolation 1 dB Compression E Series Mixer, 0.5 - 500 MHz MAMXES0108 V 2.00 Typical Performance Curves Conversion Loss -5.0 -5.2 -5.4 -5.6 -5.8 -10.0 -20.0 LO - RF Isolation 0.0 dB dB -6.0 -6.2 -6.4 -6.6 -6.8 -7.0 10 10.0 Options -30.0 -40.0 -50.0 Options 110 110.0 210 210.0 310 310.0 410 410.0 500 -60.0 10 10.0 110 110.0 210 210.0 310 310.0 410 410.0 500 Frequency (MHz) Frequency (MHz) LO - IF Isolation 0.0 -10.0 -20.0 dB -30.0 -40.0 -50.0 Options -60.0 10 10.0 110 110.0 210 210.0 310 310.0 410 410.0 500 Frequency (MHz) SM89 Ordering Information Part Number MAMXES0108 Package Tape & Reel ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 considering for development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make not guaranteed. changes to the product(s) or information contained herein without notice.