MAMXSS0011

MAMXSS0011 MMIC Medium Level Mixer 800 - 1000 MHz Features • • • • • • • • • Low Conversion Loss 1 dB Compression: +21 dBm LO Drive Level: +11 to +23 dBm DC - 100 MHz IF Bandwidth Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MD54-0004 Rev. V2 Functional Diagram C L R 8 7 6 5 Description M/A-COM’s MAMXSS0011 is a passive mixer that achieves the performance of a double balanced diode mixer in a lead-free surface mount plastic SOIC-8 package. The MAMXSS0011 is ideally suited for use where high level RF signals and very wide dynamic range are required. Typical applications include frequency up/down conversion, modulation, demodulation in systems such as cellular receivers and transmitters and 900 MHz ISM band applications. The MAMXSS0011 uses FETs as mixing elements to achieve very wide dynamic range in a low cost plastic package. The mixer operates with LO drive levels of +11 dBm to +23 dBm. DC bias is not required. M/A-COM’s MAMXSS0011 is fabricated using a mature 1-micron GaAs process. The process features full IC passivation for increased performance and reliability. 1 2 3 4 External matching network on LO Port: R = 470 ohms, L = 18 nH, C = 4.7 pF Pin Configuration Pin No. 1 2 3 4 Function Ground RF Port Ground Ground Pin No. 5 6 7 8 Function Ground LO Port IF Port Ground Ordering Information 1 Part Number MAMXSS0011 MAMXSS0011TR MAMXSS0011SMB Package Bulk Packaging 1000 piece reel Designer’s Kit 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMXSS0011 MMIC Medium Level Mixer 800 - 1000 MHz Electrical Specifications: Test Conditions: RF = 900 MHz (-10 dBm), LO = 840 MHz (13 dBm), IF = 60 MHz, TA = +25°C Parameter Conversion Loss Isolation Rev. V2 Test Conditions — LO to RF LO to IF RF to IF LO Port RF Port IF Port RF Freq. = 900 MHz, LO = +13 dBm Two tones at –10 dBm each, Tone spacing 100 kHz, IF = 60 MHz Units dB dB dB dB Ratio Ratio Ratio dBm dBc Min — — — — — — — — 45 Typ 7.5 38 22 12 2.5:1 2.0:1 2.0:1 +21 60 Max 9.5 — — — — — — — — VSWR Input 1 dB Compression Two-Tone IM Ratio2 2. IMR vs RF drive level can be calculated by the formula: IMR = 45 - (1.5 x P IN ) Absolute Maximum Ratings 3,4 Parameter RF Input Power5 LO Drive Power 5 Spurious Table 4x 3x Harmonic of LO 2x 1x 0x 8.9 -1.1 2.2 -7.7 2.9 -7.1 -2.2 -12.2 X X 40.1 39.9 34.2 34.1 23.7 23.8 0 0 4.7 4.8 70.1 61.6 59.8 63.8 72.8 64.7 61.4 63.3 65.1 61.3 69.9 63.9 67.3 64.5 72.9 63.3 71.3 61.8 71.5 61.9 73.4 64.4 73 63 71.9 61.9 71.1 61.9 72.1 62.3 Absolute Maximum +22 dBm +23 dBm -40°C to +85°C -65°C to +150°C Operating Temperature Storage Temperature 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 5. Total combined power for RF and LO ports should not exceed +23 dBm. 0x 1x 2x 3x 4x Harmonic of RF Handling Procedures Please observe the following precautions to avoid damage: The spurious table shows the spurious signals resulting from the mixing of the RF and LO input signals, assuming down conversion. Mixing products are indicated by the number of dB below the conversion loss. The lower frequency mixing term is shown for two different RF input levels. The top number is for an RF input power of -5 dBm, the lower number is for -15 dBm. |mFRF - nFLO |, RF = -5 dBm |mFRF - nFLO |, RF = -15 dBm RF Frequency = 900 MHz LO Frequency = 840 MHz Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMXSS0011 MMIC Medium Level Mixer 800 - 1000 MHz Typical Performance Curves Conversion Loss 10 Rev. V2 Isolation 50 9 40 8 30 LO to RF LO to IF RF to IF 7 20 6 10 5 800 850 900 950 1000 0 800 850 900 950 1000 RF Frequency (MHz) RF Frequency (MHz) Input P1dB 30 RF, LO and IF VSWR IF Frequency (MHz) 0 5 40 80 120 160 200 25 4 RF LO IF 20 3 15 2 1 10 800 850 900 950 1000 RF Frequency (MHz) 0 800 840 880 920 960 1000 RF Frequency (MHz) Lead-Free SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.