MAPD-007249-ESML21

RoHS Compliant E-Series 2-Way 0° Power Divider 5 – 500 MHz Features • • • • • • Surface mount Wide frequency range 2-Way—0° Lead Free RoHS* Compliant and is 2600C reflow compatible. Available on Tape and Reel. MAPD-007249-ESML21 V1P SM-24 package Description M/A-COM’s MAPD-007249-ESML21 is a RoHS compliant 2 Way 0° Power Divider in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Parts are packaged in tape & reel. Pin Configuration Pin No. 1 2 3 4 5 6 Ordering Information Function Ground Not Connected Port 2 Port 1 Not Connected Input Note: Reference Application Note M513 for reel size information. Part Number MAPD-007249-ESML21 Package 500 piece reel Absolute Maximum Ratings 1,2 Parameter Maximum Power Rating Internal Load Dissipation Pin Temperature (10 Sec) Operating Temperature Storage Temperature Absolute Maximum 1 Watt 0.125 Watt 250°C -40°C to +85°C -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. RoHS Compliant E-Series 2-Way 0° Power Divider 5 – 500 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter RF Frequency MAPD-007249-ESML21 V1P Test Conditions — Frequency 5 - 500 5 - 500 50 –250 250 - 500 5 - 500 50 –250 250 - 500 5 - 500 50 –250 250 - 500 5 - 500 50 –250 250 - 500 Units MHz dB dB dB dB dB dB dB dB dB Degrees Degrees Degrees Min — — — — 25 24 23 — — — — — — Typ — 0.25 0.3 0.5 50 33 30 — — — — — — Max — 0.5 0.5 1.0 — — — 0.15 0.3 0.6 1 2 5 Insertion Loss FL—fU Isolation FL—fU Amplitude Unbalance FL—fU Phase Unbalance FL—fU 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.