MAPD-007999-CT13TB

MAPDCT0013 2 Way 0º Power Divider 5 to 1000 MHz Features • • • • • Surface mount 2 Way 0 degree. 260°C reflow compatible RoHS* compliant Available on tape and reel. M/A-COM Products Released, Rev. V1 Schematic with off-chip components Description M/A Com’s MAPDCT0013 is a 2 way 0 degree RF power divider in a low cost, surface mount package. Ideally suited for high volume CATV/broadband applications. Two 0603 0.5pF capacitors and one 160Ω resistor are required with this part. Case style: SM-156 Pin configuration Pin no. 1 2 3 4 5 6 Function Ground External 0.5pF Capacitor to ground Output 2 Output 1 External 0.5pF Capacitor to ground Input Unless otherwise stated dimensions are in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Note: Pin’s 2 and 5 need to be connected together on the PCB as shown above. Ordering information Part number MAPDCT0013TR MAPD-007999-CT13TB 1 Description Reel quantity 2000 Customer Test Board * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Note: Reference Application Note M513 for reel size information. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0013 2 Way 0º Power Divider 5 to 1000 MHz Electrical specifications: TA = 25°C, Z0 = 75Ω Frequency Range Insertion Loss 1 Pin 6 to 4 Insertion Loss 2 Pin 6 to 3 Amplitude Balance Phase Balance Input Return Loss Test Conditions 5 – 500 MHz 500 – 870 MHz 870 – 1000 MHZ 5 – 500 MHz 500 – 870 MHz 870 – 1000 MHZ 5 – 870 MHz 870 – 1000 MHz 5 – 870 MHz 870 – 1000 MHz 5 – 400 MHz 400 – 820 MHz 820 – 1000 MHz 5 – 300 MHz 300 – 870 MHz 870 – 1000 MHz 5 – 500 MHz 500 – 870 MHz 870 – 1000 MHz 5 – 500 MHz 500 – 870 MHz 870 – 1000 MHz Units dB dB dB dB dB dB dB dB 0 0 M/A-COM Products Released, Rev. V1 Nominal 0.2 0.7 1.15 0.25 0.6 1.3 0.2 0.15 1.5 1.5 36 32 25 33 20 18 28 19.3 14.8 27 21 14.5 Max 0.6 1.3 1.6 0.6 1.3 2.1 ±0.5 ±0.65 ±2.4 ±4.2 24 20 15 25 16 15 20 14.5 11.3 20 14.5 11.3 dB dB dB dB dB dB dB dB dB dB dB dB Isolation Output Return Loss 1 Output Return Loss 2 Absolute maximum ratings¹ ² Parameter Max input power Internal Load Dissipation Operating temperature Storage temperature Absolute maximum 1W 0.125W -40°C to +85°C -40°C to +100°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0013 2 Way 0º Power Divider 5 to 1000 MHz Typical performance curves: TA = 25°C, Z0 = 75Ω Insertion loss 1: pin 6 to pin 4 0.0 -0.5 M/A-COM Products Released, Rev. V1 0.0 Insertion loss 2: pin 6 to pin 3 -0.5 dB dB -1.0 -1.5 -2.0 5 204 403 602 801 1000 -1.0 -1.5 -2.0 5 204 403 602 801 1000 Frequency (MHz) Frequency (MHz) Amplitude balance 0.3 0.2 0.1 dB 0.0 -0.1 -0.2 -0.3 5 204 403 602 801 1000 Frequency (MHz) Phase balance 3 2 Degrees 1 0 -1 -2 -3 5 204 403 602 801 1000 Frequency (MHz) Return loss: Input 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 Return loss: Output (1 and 2) 0 -5 -10 dB dB -15 -20 -25 -30 -35 5 204 403 602 801 1000 5 204 403 602 801 1000 Frequency (MHz) 3 Frequency (MHz) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.