MAPD-008762-ES0001

RoHS Compliant E-Series 2-way 90˚ Power Divider 120 – 160 MHz Features • • • • • • 2-way 90 Degree Surface Mount Tape and reel packaging available 260°C Reflow Compatible RoHS* compliant version of the MAPDES0001 MAPD-008762-ES0001 V1 SM - 87 Package Description M/A-COM’s MAPD-008762-ES0001 is a RoHS Compliant 2-way 90˚ power divider in a low cost, surface mount package. Ideally suited for high volume cellular, wireless applications. The MAPD-008762-ES0001 is available in a SM-87 surface mount package and is designed to be utilized in both RoHS and standard reflow profiles. Parts are packaged in tape & reel. Ordering Information Part Number MAPD-008762-ES0001 Pin Configuration Package Pin No. Input Port 1 Function 1 3 6 4 2,5 Tape and Reel (900 piece Reel) Absolute Maximum Ratings 1,2 Parameter Impedance Port 2 External 50 Ohms Absolute Maximum 50 Ohms nominal Not Connected RF Power Internal Load Dissipation Operating Temperature Storage Temperature 1 Watt 0.125 Watt -40°C to +85°C -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. RoHS Compliant E-Series 2-way 90˚ Power Divider 120 – 160 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Frequency Range 40 - 1000 MHz Test Conditions 120 - 160 MHz 120 - 160 MHz 120 - 160 MHz 120 - 160 MHz Nominal — — — — Units dB dB dB 0 MAPD-008762-ES0001 V1 Min. — 20 — — Typ. 0.5 25 1.0 1° Max. 1.0 — 1.6 3° Insertion Loss (Above 3dB) Isolation Amplitude Unbalance Phase Unbalance Typical Performance Curves Insertion Loss Port 1 1.0 0.8 0.6 0.4 0.2 Insertion Loss port 2 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 dB 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0 160.0 Frequency (MHz) -1.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0 160.0 Amplitude Unbalance 1.5 1.0 0.5 Phase Unbalance 95.0 94.0 93.0 92.0 91.0 dB 0.0 -0.5 -1.0 -1.5 120.0 130.0 140.0 150.0 160.0 dB 90.0 89.0 88.0 87.0 86.0 85.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0 160.0 Frequency (MHz) Frequency (MHz) Isolation -20.0 -22.0 -24.0 dB -26.0 -28.0 -30.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0 160.0 Frequency (MHz) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.