MAPD-010201-8022CG

MAPD-010201-8022CG E-Series Surface Mount Power Divider 1-2200 MHz Features Schematic Rev. V1 · · · · 2 W ay 50Ohm Surface Mount 0 Degree Broad Band performance Description MAPD-010201-8022CG is a RoHS compliant 2 Way 0° Power Divider in a low cost, surface mount package. Product Image Component Dimensions Pin Configuration Pin No. 1 2 3 4 5 6 Function Input Not Used (GND) Output Port1 Output Port2 Not Used (GND) Ground ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-010201-8022CG E-Series Surface Mount Power Divider 1-2200 MHz Electrical Specifications: TA = 25° Z 0 = 50Ω C, Parameter Insertion Loss (Above 3dB) Isolation Rev. V1 Frequency (MHz) 1 - 2200 1 - 800 800 - 1000 1000 -1800 1800 -2200 1 - 800 800 - 1000 1000 -1800 1800 -2200 1 - 2200 1 - 800 800 - 1000 1000 -1800 1800 -2000 1 - 800 800 - 1000 1000 -1800 1800 -2000 Units dB dB dB dB dB dB dB dB dB deg dB dB dB dB dB dB dB dB Min — — 13.5 15 17 — — — — — 8 10 — 15 18 17 12 10 Typ 0.6 12 15 17 18 0.2 0.5 0.7 1.2 1 10 10.6 14 16 22 20 19 12 Max 1.2 13 17 19 — 0.5 0.7 1.2 1.5 3 — — — — — — — — Amplitude Balance Phase Balance Input Return Loss Output Return Loss Absolute Maximum Ratings 1,2 Parameter RF Power Internal Load Dissipation Operating Temperature Storage Temperature Absolute Maximum 250 mW 50 mA -40° to +80° C C -55° to +125° C C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-010201-8022CG E-Series Surface Mount Power Divider 1-2200 MHz Typical Performance Curves Insertion Loss 0 -0.5 dB -1 -1.5 -2 0 440 880 MHz 1320 1760 2200 dB Rev. V1 Amplitude Unbalance 2.5 2 1.5 1 0.5 0 -0.5 0 440 880 MHz 1320 1760 2200 Phase Unbalance 3 Degree Input Return Loss 0 -5 dB -10 -15 -20 1 -1 -3 0 440 880 MHz 1320 1760 2200 0 440 880 MHz 1320 1760 2200 Output Return Loss 0 -5 -10 -15 -20 -25 -30 0 440 880 MHz 1320 1760 2200 Isolation 0 -5 dB -10 -15 -20 0 440 880 MHz 1320 1760 2200 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. dB MAPD-010201-8022CG E-Series Surface Mount Power Divider 1-2200 MHz Tape & Reel Information Rev. V1 Item Ao Bo Ko Dimension 4.00mm +/-0.1mm 4.00mm +/-0.1mm 2.9mm +/-0.1mm W P1 12.00mm +/-0.3mm 8.00mm +/-0.1mm Ordering Information Part Number MAPD-010201-8022CG Package Tape and Reel (2000 piece Reel) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.