MAPD-010281-C2W024

MAPD-010281-C2W024 2 Way 0º Power Divider 5 - 1200 MHz Features • • • • • • Surface Mount 2 W ay 0º RoHS* Compliant Pb free. 260ºC reflow compliant Rev. V2 Schematic with external resistor Description M/A-COM Technology Solutions MAPD-010281C2W024 is a 2 Way 00 Power Divider in a low cost, surface mount package. Ideally suited for high volume CATV applications. An external 160 Chip resistor is required with this part. Component Dimensions: 3.50mm 1 6 2 5 R3.13mm 7.20mm 3 TOP VIEW 4 SIDE VIEW Pin Configuration Pin No. Function 3 2.65mm 6.55mm 4 2.85mm 1.04mm 2 5 1.50mm 1 BOTTOM VIEW 6 Recommended PCB Design Input Ground Not Connected Port 1 Port 2 6 1 2, 5 4 3 Dimensions in mm. Tolerance: ± 0.20, unless otherwise stated. Drawing not to scale. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-010281-C2W024 2 Way 0º Power Divider 5 - 1200 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 75 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss (Ref. Level –3dB) 5 – 500MHz 500 – 870MHz 870 – 1002Mhz 1002 – 1200MHz 5 – 40MHz 40 – 400MHz 400 – 1200MHz 5 – 500MHz 500 – 1200MHz 5 – 40MHz 40 – 1002MHz 1002 – 1200MHz 5 – 40MHz 40 – 1002MHz 1002 – 1200MHz dB dB dB dB dB dB dB o o – – – – – – – – – 17 18 16 18 18 18 3.50 3.85 3.97 4.29 0.2 0.22 0.27 1.3 2.1 21.0 26.0 23.5 36.0 32.8 22.6 3.90 4.30 4.51 5.10 ±0.6 ±0.4 ±0.6 ±4.0 ±6.0 – – – – – – Amplitude Unbalance Phase Unbalance Output Return Loss dB dB dB dB dB dB Input Return Loss Recommended Ratings1,2 Parameter Value RF Power DC Current Internal Load Dissipation Operating/Storage Temperature +30dBm (1W) 30 mA 0.125W -40° C to +125° C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-010281-C2W024 2 Way 0º Power Divider 5 - 1200 MHz Rev. V2 Typical Performance Curves: TA = 25°C, Z0 = 75Ω Insertion Loss 0.0 -1.0 Input Return Loss 0 -5 -10 -2.0 -15 dB dB dB dB -3.0 -4.0 -20 -25 -30 -5.0 - 6.0 5 244 483 722 961 1200 Frequency (MHz) -35 - 40 5 244 483 722 961 1200 Frequency (MHz) Amplitude Unbalance 0.8 0.6 0.4 Phase Unbalance 6 4 2 Degrees Degrees 0.2 dB dB 0.0 -0.2 -0.4 0 -2 -4 -0.6 -0.8 5 244 483 722 961 1200 Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. -6 5 244 483 722 961 1200 Frequency (MHz) MAPD-010281-C2W024 2 Way 0º Power Divider 5 - 1200 MHz Tape & Reel Information Rev. V2 DIRECTION OF FEED Bo W Ko P1 Orientation Ao Item Ao Bo Ko W P1 Dimension 6.70mm +/- 0.1mm 7.50mm +/- 0.1mm 3.80mm +/- 0.1mm 16.00mm +/- 0.3mm 12.00mm +/- 0.1mm Ordering Information Part Number MAPD-010281-C2W024 1000024116 Package 900 piece reel Sample Test Board 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.