MAPD-010320-5070HR

MAPD-010320-5070HR E-Series 2-Way 90° Power Divider 50-70 MHz Features • • • • • • 2-way 90 Degree Surface Mount Tape and reel packaging available 260°C Reflow Compatible RoHS* compliant Rev. V1 Schematic Description M/A-COM’s MAPD-010320-5070HR is a RoHS Compliant 2-way 90˚ power divider in a low cost, surface mount package. Ideally suited for high volume cellular, wireless applications. The MAPD-010320-5070HR is designed to be utilized in both RoHS and standard reflow profiles. Parts are packaged in tape & reel. Product Image Pin Configuration Pin No. Input Port 1 Port 2 External 50 Ohms Not Connected 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Function 1 4 6 3 2,5 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. MAPD-010320-5070HR E-Series 2-Way 90° Power Divider 50-70 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Frequency 50 - 70 MHz 60 - 65 MHz 50 - 70 MHz 60 - 65 MHz 50 - 70 MHz 60 - 65 MHz 50 - 70 MHz 50 - 70 MHz Units dB dB dB dB dB 0 Rev. V1 Min. — — 30 30 — — — 24 Typ. 0.3 0.1 — 32 1.0 0.1 0.3° 27 Max. 0.5 0.3 — — 2.0 0.5 0.5° — Insertion Loss Isolation (Average above 3dB) Amplitude Unbalance Phase Unbalance Input Return Loss dB Absolute Maximum Ratings 1,2 Parameter Impedance Absolute Maximum 50 Ohms nominal RF Power Internal Load Dissipation Operating Temperature Storage Temperature 1 W att 0.125 Watt -40°C to +85°C -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-010320-5070HR E-Series 2-Way 90° Power Divider 50-70 MHz Typical Performance Curves Insertion Loss -2 -2.5 dB dB Rev. V1 Isolation -20 -25 -30 -35 -40 -3 -3.5 -4 -4.5 50 55 60 MHz 65 70 50 55 60 MHz 65 70 Amplitude Unbalance Phase Unbalance 2 Degree 91 90.5 90 89.5 89 1 dB 0 -1 -2 50 55 60 MHz 65 70 50 55 60 MHz 65 70 Input Return Loss Output Return Loss 0 -10 dB -30 -40 50 55 60 MHz 65 70 dB -20 0 -5 -10 -15 -20 -25 -30 50 55 60 MHz 65 70 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-010320-5070HR E-Series 2-Way 90° Power Divider 50-70 MHz Tape Specification Rev. V1 Item Ao Bo Ko Dimension 7.01mm +/-0.1mm 8.61mm +/-0.1mm 5.23mm +/-0.1mm W P1 16.00mm +/-0.3mm 12.00mm +/-0.1mm Ordering Information Part Number MABA-010320-5070HR Package Tape and Reel (900 piece Reel) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.