MAPDCC0001-TB

MAPDCC0001 Low Cost Two-Way SMT Power Divider 824-960 MHz Features • • • • • • • • • • • Small Size and Low Profile Excellent Amplitude and Phase Balance Superior Repeatability Typical Insertion Loss 0.5 dB Typical Isolation 23 dB 1 Watt Power Handling Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS52-0001 Rev. V4 Functional Block Diagram Description M/A-COM’s MAPDCC0001 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include base station switching networks and other communication applications where size and PCB real estate are a premium. Available in tape and reel. The MAPDCC0001 is fabricated using a passiveintegrated circuit process. The process features full-chip passivation for increased performance and reliability. Pin Configuration Pin No. Function GND RF-IN GND GND RF-1 (out) GND GND RF-2 (out) Ordering Information Part Number MAPDCC0001 MAPDCC0001TR MAPDCC0001-TB 1 2 Package Bulk Packaging 1000 piece reel Sample Test Board 3 4 5 6 7 8 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0001 Low Cost Two-Way SMT Power Divider 824-960 MHz Electrical Specifications1: TA = +25°C Parameter Insertion Loss Isolation VSWR Amplitude Balance Phase Balance Input Output Above 3.0dB Rev. V4 Units dB dB — — dB Deg. Min — 15 — — — — Typ 0.5 23 1.35:1 1.25:1 0.05 0.5 Max 0.6 — 1.5:1 1.4:1 0.15 1.5 1. All specifications apply with a 50-Ohm source and load impedance. Absolute Maximum Ratings 2,3 Parameter Input Power4 Operating Temperature Storage Temperature 2. 3. 4. Recommended PCB Configuration Absolute Maximum 1 W CW -40°C to +85°C -65°C to +150°C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With Internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0001 Low Cost Two-Way SMT Power Divider 824-960 MHz Typical Performance @ +25ºC Insertion Loss vs. Frequency Isolation vs. Frequency Rev. V4 0.7 0.6 25 20 1 5 1 0 5 0 824 824 858 892 926 960 Insertion Loss (dB) 0.5 0.4 0.3 0.2 0.1 0.0 Isolation (dB) 858 892 926 960 Fre que ncy (MHz ) Fre que ncy (MHz ) VSWR vs. Frequency Phase Balance vs. Frequency Relative to RF1 1 .5 1 .4 0.20 Phase Balance (Deg) Output Input 0.1 5 0.1 0 0.05 0.00 824 858 892 926 960 VSWR 1 .3 1 .2 1 .1 1 .0 824 858 892 926 960 Fre que ncy (MHz ) Fre que ncy (MHz ) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0001 Low Cost Two-Way SMT Power Divider 824-960 MHz Lead-Free, SOIC-8† Rev. V4 † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.