MAPDCC0005-TB

MAPDCC0005 Low Cost Three Way Power Splitter/Combiner 824 – 960 MHz Features • • • • • • • • • • Small Size and Low Profile Excellent Insertion Loss 0.6 dB Typical Superior Repeatability Low Cost CSM, AMPS, CDPD, ARDIS, RAM Frequency Coverage Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS53-0001 Rev. V3 Functional Block Diagram1 Description M/A-COM’s MAPDCC0005 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 3-way power divider is ideally suited for applications where small size, low profile, and low cost without sacrificing Performance, are required. Typical applications include Base Stations, portables and PCMCIA cards for cellular applications. Available in Tape and Reel. The MAPDCC0005 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. 1. All unused pins must be RF and DC grounded. Pin Configuration Pin No. Function GND RF IN GND GND Pin No. 5 6 7 8 Function RF OUT GND RF OUT RF OUT Ordering Information Part Number MAPDCC0005 MAPDCC0005TR MAPDCC0005-TB 1 2 Package Bulk Packaging 1000 piece reel Sample Test Board 3 4 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0005 Low Cost Three Way Power Splitter/Combiner 824 – 960 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Insertion Loss above 4.78 dB Isolation VSWR Amplitude Balance Phase Balance Rev. V3 Units dB dB — dB Deg Min — 15 — — — Typ 0.6 18 1.4:1 0.6 2 Max 0.7 — 1.6:1 0.8 4 Absolute Maximum Ratings 2,3 Parameter Input Power 4 Absolute Maximum 1W CW -40°C to +85°C -65°C to +150°C Operating Temperature Storage Temperature Recommended PCB Configuration 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W Maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0005 Low Cost Three Way Power Splitter/Combiner 824 – 960 MHz Typical Performance Curves Insertion Loss vs. Frequency VSWR Input vs. Frequency Rev. V3 Isolation vs. Frequency VSWR Output vs. Frequency 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0005 Low Cost Three Way Power Splitter/Combiner 824 – 960 MHz Lead-Free, SOIC-8† Rev. V3 † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.