MAPDCC0008

MAPDCC0008 Low Cost Four-Way SMT Power Splitter/Combiner, 1700 - 2000 MHz Features • • • • • • • • • • • • Small Size and Low Profile Industry Standard SOW-16 SMT Plastic Package Excellent Repeatability (Lot-to-Lot Variation) Typical Isolation: 18 dB Typical Amplitude Balance: 0.1 dB Low Cost Typical Insertion Loss: 1.0 dB Lead-Free SOW-16 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS54-0002 Rev. V3 Functional Block Diagram Description M/A-COM’s MAPDCC0008 is an IC-based monolithic power splitter/combiner in a low cost SOW-16 plastic package. This device is ideally suited for applications where PCB real estate is at a premium and standard packaging for automated assembly and low cost are critical. Typical applications include infrastructure, portables and peripheral devices (PCMCIA cards) for wireless standards such as GSM, AMPS, CDPD, RAM and ARDIS. Available in tape and reel. The MAPDCC0008 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Pin Configuration Pin No. 1 2 3 Function GND GND RF2 (OUT) GND RF1 (OUT) GND RF IN GND Pin No. 9 10 11 12 13 14 15 16 Function GND GND GND RF4 (OUT) GND RF3 (OUT) GND GND Ordering Information Part Number MAPDCC0008 MAPDCC0008TR MAPDCC0008-TB Package Bulk Packaging 1000 piece reel Sample Test Board 4 5 6 7 8 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0008 Low Cost Four-Way SMT Power Splitter/Combiner, 1700 - 2000 MHz Electrical Specifications: TA = 25°C1 Parameter Insertion Loss (Above 6.0 dB) Isolation Input VSWR Output VSWR Amplitude Balance Phase Balance Rev. V3 Test Conditions — — — — — — Frequency — 1700 - 1800 MHz 1801 - 2000 MHz — 1700 - 1800 MHz 1801 - 2000 MHz — — Units dB dB dB Ratio Ratio Ratio dB Deg Min — 18 17 — — — — — Typ 1.0 23 22 1.5:1 — — 0.1 4 Max 1.5 — — 1.7:1 1.3:1 1.5:1 0.7 7 1. All specifications apply with a 50-ohm source and load impedance. Absolute Maximum Ratings 2,3 Parameter Input Power 4 Recommended PCB Configuration Absolute Maximum 1W CW -40°C to +85°C -65°C to +150°C Operating Temperature Storage Temperature 2. 3. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0008 Low Cost Four-Way SMT Power Splitter/Combiner, 1700 - 2000 MHz Lead-Free, SOW-16† Rev. V3 † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.