MAPDCC0009-TB

MAPDCC0009 Low Cost Four-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 Features • • • • • • • • • • • Low Cost Small Size and Low Profile Superior Repeatability (Lot-to-Lot Variation) Typical Insertion Loss: 0.8 dB Typical Isolation: 24 dB Typical Amplitude Balance: 0.3 dB Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS54-0005 Functional Diagram RF 1 RF 2 RF IN GND GND GND Description M/A-COM’s MAPDCC0009 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOIC-8 plastic package. This 4-way power divider is ideally suited for applications where PCB real estate is at a premium and standard packaging for automated assembly and low cost are critical. Typical applications include infrastructure, portables, and peripheral devices (PCMCIA cards) for wireless standards such as GSM, AMPS, CDPD, RAM, and ARDIS. Available in tape and reel. The MAPDCC0009 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. RF 4 RF3 1. Pins 2, 6, and 7 must be DC and RF grounded. Pin Configuration Pin No. Function RF 1 RF IN GND RF 4 Pin No. 5 6 7 8 Function RF 3 GND GND RF 2 Ordering Information Part Number MAPDCC0009 MAPDCC0009-TR MAPDCC0009-TB 1 2 Package Bulk Packaging 2000 piece reel Sample Test Board 3 4 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0009 Low Cost Four-Way GMIC SMT Power Divider 824 – 960 MHz Electrical Specifications: TA = +25°C, Z0 = 50Ω Parameter Insertion Loss Above 6.0 dB Isolation VSWR Input Output Amplitude Balance Phase Balance Units dB dB — — dB ° Rev. V2 Min — 20 — — — — Typ 0.8 24 1.4:1 1.25:1 0.3 3 Max 1.1 — 1.7:1 1.5:1 0.6 6 Absolute Maximum Ratings 2,3 Parameter Input Power 4 Absolute Maximum 1W CW -40°C to +85°C -65°C to +150°C RF OUT .000 2X ° .050 PLATED THRU RF OUT Recommended PCB Configuration Operating Temperature Storage Temperature 2. 3. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125 W maximum. RF IN .244 .030 TYP. RF OUT Handling Procedures Please observe the following precautions to avoid damage: RF OUT 12X ° PLATED THRU .016 .072 Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0009 Low Cost Four-Way GMIC SMT Power Divider 824 – 960 MHz Typical Performance Curves Insertion Loss vs. Frequency (Dashed lines show amplitude balance window) VSWR vs. Frequency Rev. V2 Isolation vs. Frequency Phase Balance vs. Frequency (Relative to RF1) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0009 Low Cost Four-Way GMIC SMT Power Divider 824 – 960 MHz Lead-Free, SOIC-8† Rev. V2 † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.