MAPDCC0010-TB

MAPDCC0010 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Features • • • • • • • • • Small Size and Low Profile Typical Insertion Loss: 1.0 dB Typical Amplitude Balance: 0.1 dB 1 Watt Power Handling Lead-Free SOT-25 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS52-0007 Rev. V2 Functional Block Diagram GND RF IN 5 4 Description M/A-COM’s MAPDCC0010 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-25 plastic package. This 2way power divider is ideally suited for applications where small size, low insertion loss, superior phase/ amplitude tracking and low cost are required. Typical applications include handsets, base station switching networks and other communication applications where size and PCB real estate are at a premium. Available in Tape and Reel. The MAPDCC0010 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. 1 2 3 RF1 (Out) GND RF2 (Out) Ordering Information Part Number MAPDCC0010 MAPDCC0010-TR MAPDCC0010-TB Pin Configuration Package Bulk Packaging 1000 piece reel Sample Test Board Pin No. 1 2 3 4 Function RF1 (OUT) GND RF2 (OUT) GND RF IN Note: Reference Application Note M513 for reel size information. 5 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0010 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Insertion Loss (above 3.0 dB theoretical loss) Isolation Input VSWR Output VSWR Amplitude Balance Phase Balance Rev. V2 Frequency 2200 - 2500 MHz 2200 - 2500 MHz 2200 - 2500 MHz 2200 - 2500 MHz 2200 - 2500 MHz 2200 - 2500 MHz Units dB dB Ratio Ratio dB ° Min — 15 — — — — Typ 1.0 22 1.6:1 1.3:1 0.1 2 Max 1.1 — 1.8:1 1.5:1 — — Absolute Maximum Ratings 1,2 Parameter Input Power 3 Absolute Maximum 1 W CW -40°C to +85°C -65°C to +150°C Operating Temperature Storage Temperature Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 3. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Dimensions in inches. Circuit Material: FR-4, .016 Thick. Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0010 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency Isolation vs. Frequency Rev. V2 1.5 26 24 Insertion Loss (dB) 1.0 Isolation (dB) 2275 2350 2425 2500 22 20 18 16 0.5 0 .0 2200 14 2200 2275 2350 2425 2500 Fre que ncy (MHz ) Fre que ncy (MHz ) VSWR vs. Frequency Lead-Free, SOT-25† Inp ut Out p ut 2.0 1.8 VSW R 1.6 1.4 1.2 1.0 2200 2275 2350 2425 2500 Frequency (MHz) † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.