MAPDCC0011

MAPDCC0011 Low Cost Two-Way GMIC SMT Power Divider 824 – 960 MHz Features • • • • • • • • • • Small Size and Low Profile Industry Standard SOT-26 SMT Plastic Package Typical Insertion Loss: 0.6 dB Typical Isolation: 15 dB 1 Watt Power Handling Lead-Free SOT-26 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS52-0008 Rev. V2 Functional Diagram RF 1 GND RF 2 GND RF IN GND Description M/A-COM’s MAPDCC0011 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-26 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include personal communication systems and other communication applications where size and PCB real estate are at a premium. Available in tape and reel. The MAPDCC0011 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Pin Configuration Pin No. 1 2 3 Function RF1 GND RF2 Pin No. 4 5 6 Function GND RF IN GND Ordering Information Part Number MAPDCC0011 MAPDCC0011-TR MAPDCC0011-TB Package Bulk Packaging 1000 piece reel Sample Test Board Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0011 Low Cost Two-Way GMIC SMT Power Divider 824 – 960 MHz Electrical Specifications: TA = 25°C1 Parameter Insertion Loss Above 3.0 dB Isolation VSWR Input RF1, RF2 Outputs Amplitude Balance Phase Balance Units dB dB — — dB Deg. Rev. V2 Min — 13 — — — — Typ 0.6 15 1.3:1 1.3:1 0.1 3 Max 0.8 — 1.4:1 1.5:1 0.25 5 1. All specifications apply with a 50-ohm source and load impedance. Absolute Maximum Ratings Parameter Input Power 4 2,3 Recommended PCB Configuration Absolute Maximum 1W CW -40°C to +85°C Operating Temperature 2. 3. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0011 Low Cost Two-Way GMIC SMT Power Divider 824 – 960 MHz Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency (Dashed lines show amplitude balance window) 0 Rev. V2 VSWR vs. Frequency q y 2 1.8 Insertion Loss dB Input Output -0.25 VSW R 1.6 1.4 1.2 1 824 -0.5 -0.75 -1 824 858 892 926 960 858 892 926 960 Frequency MHz Frequency MHz Isolation vs. Frequency Phase Balance vs. Frequency (Relative to RF1) 0 0 Phase, degrees Isolation dB -5 -2 -4 -6 -8 -10 824 -10 -15 -20 824 858 892 926 960 858 892 926 960 Frequency MHz Frequency MHz 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0011 Low Cost Two-Way GMIC SMT Power Divider 824 – 960 MHz Lead-Free SOT-26† Rev. V2 † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.