MAPDCC0015

MAPDCC0015 Low Cost Five-Way GMIC SMT Power Divider 1850-1990 MHz Features • • • • • • • • • • • Small Size, Low Profile Superior Repeatability (Lot-to-Lot Variation) Typical Isolation: 28 dB Typical Insertion Loss: 0.7 dB Low Cost 1 Watt Power Handling Lead-Free SOIC-16 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS55-0003 Rev. V2 Functional Block Diagram Description M/A-COM’s MAPDCC0015 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOIC-16 plastic package. This 5-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The MAPDCC0015 is fabricated using a passiveintegrated circuit process. The process features full-chip passivation for increased performance and reliability. Pin Configuration Pin No. 1 Function GND GND GND RF2 GND RF1 GND RF IN Pin No. 9 10 11 12 13 14 15 16 Function GND GND RF5 GND RF4 GND RF3 GND Ordering Information Part Number MAPDCC0015 MAPDCC0015-TR MAPDCC0015-TB 2 3 Package Bulk Packaging 1000 piece reel Sample Test Board 4 5 6 7 8 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0015 Low Cost Five-Way GMIC SMT Power Divider 1850-1990 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Insertion Loss Isolation VSWR VSWR Amplitude Balance Phase Balance Input Output Above 7.0dB Units dB dB — — Rev. V2 Min — 21 — — Typ 0.7 28 1.5:1 1.2:1 Max 1.2 — 1.6:1 1.5:1 dB ° — — 0.2 6 0.5 12 Absolute Maximum Ratings 1,2 Parameter Input Power4 Operating Temperature Storage Temperature 1. 2. 3. Handling Procedures Please observe the following precautions to avoid damage: Absolute Maximum 1 W CW -40°C to +85°C -65°C to +150°C Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With Internal load dissipation of 0.125 W maximum. Typical Performance Curves Insertion Loss vs. Frequency (Dashed lines show amplitude balance window) VSWR vs. Frequency Isolation vs. Frequency Phase Balance vs. Frequency (Relative RF1) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0015 Low Cost Five-Way GMIC SMT Power Divider 1850-1990 MHz Lead-Free, SOIC-16† Rev. V2 † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.