MAPDCC0021-TR

MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Features • • • • • • • • • • • Small Size, Low Profile Superior Repeatability (Lot-to-Lot Variation) Typical Isolation: 30 dB Typical Insertion Loss: 1.5 dB Low Cost 1 Watt Power Handling Lead-Free QSOP-20 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS58-0001 Rev. V2 Functional Block Diagram Description M/A-COM’s MAPDCC0021 is an IC-based monolithic power divider in a low cost QSOP-20 plastic package. This 8-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The MAPDCC0021 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. 1. Pins 1, 3, 5, 7, 9, 12, 14, 16, 18, and 20 should be RF and DC grounded. Pin Configuration Pin No. 1 2 3 Function GND RF 4 (OUT) GND RF 3 (OUT) GND RF 2 (OUT) GND RF 1 (OUT) GND RF IN Pin No. 11 12 13 14 15 16 17 18 19 20 Function NC GND RF 8 (OUT) GND RF 7 (OUT) GND RF 6 (OUT) GND RF 5 (OUT) GND Ordering Information Part Number MAPDCC0021 MAPDCC0021-TR MAPDCC0021-TB 4 5 Package Bulk Packaging 1000 piece reel Sample Test Board 6 7 8 9 10 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Insertion Loss Above 9.0 dB Isolation VSWR Amplitude Balance Phase Balance Rev. V2 Units dB dB — dB Deg. Min — 20 — — — Typ 1.5 30 1.7:1 0.4 5 Max 2.0 — 2.0:1 0.8 10 Absolute Maximum Ratings 2,3 Parameter Input Power4 Operating Temperature Storage Temperature 2. 3. 4. Handling Procedures Please observe the following precautions to avoid damage: Absolute Maximum 1W CW -40°C to +85°C -65°C to +150°C Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125 W maximum. Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency VSWR vs. Frequency 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Typical Performance Curves @ 25ºC Isolation vs. Frequency Rev. V2 Lead-Free, QSOP-20† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.