MAPDCT0010TR

MAPDCT0010 2 Way 0º Reverse Path Power Divider 5 to 100 MHz Features • • • • • Surface mount 2 Way 0 degree. 260°C reflow compatible RoHS* compliant Available on tape and reel. M/A-COM Products Released, Rev. V3 Schematic with off-chip components Description M/A Com’s MAPDCT0010 is a 2 way 0 degree reverse path power divider in a low cost, surface mount package. Ideally suited for high volume CATV & VSAT applications. Two 0603 1pF capacitors and one 160Ω resistor are required with this part. Pin 1 ID Mark Case style: SM-150 Pin configuration Pin no. 1 2 3 4 5 6 Function Output 2 External 1pF Capacitor to ground Ground Input External 1pF Capacitor to ground Output 1 Unless otherwise stated dimensions are in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Note: Pin’s 2 and 5 need to be connected together on the PCB as shown above. Ordering information Part number MAPDCT0010TR Description Reel quantity 1000 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0010 2 Way 0º Reverse Path Power Divider 5 to 100 MHz Electrical specifications: TA = 25°C, Z0 = 75Ω Parameter Insertion Loss Amplitude Unbalance Phase Unbalance Isolation Input Return Loss Output Return Loss 1 (pin6) Output Return Loss 2 (pin1) Frequency 5 - 100 MHz 5 - 20 MHz 20 - 100 MHz 5 - 20 MHz 20 - 100 MHz 5 - 100 MHz 5 - 20 MHz 20 - 100 MHz 5 - 20 MHz 20 - 100 MHz 5 - 20 MHz 20 - 100 MHz Units dB dB dB º º dB dB dB dB dB dB dB Min 28 16 22 16 25 13 22 Typ 0.3 ±0.25 ±0.15 ±2.5 ±0.5 32 22 27 22 29 16 27 Max 0.6 ±0.40 ±0.25 ±6.0 ±2.0 - M/A-COM Products Released, Rev. V3 Absolute maximum ratings¹ ² Parameter Max input power Internal Load Dissipation Operating temperature Storage temperature Absolute maximum 1W 0.125W -40°C to +80°C -40°C to +85°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0010 2 Way 0º Reverse Path Power Divider 5 to 100 MHz Typical performance curves: TA = 25°C, Z0 = 75Ω Insertion loss 1: pin 4 to pin 6 (ref value -3dB) -3.0 -3.2 -3.4 M/A-COM Products Released, Rev. V3 Insertion loss 2: pin 4 to pin 1(ref value -3dB) -3.0 -3.2 -3.4 dB dB -3.6 -3.8 - 4.0 5 24 43 62 81 100 -3.6 -3.8 -4.0 5 24 43 62 81 100 Frequency (MHz) Frequency (MHz) Amplitude balance 1.0 0.8 0.6 Phase balance 5.0 3.0 D eg rees 0.4 dB 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 5 24 43 62 81 100 1.0 -1.0 -3.0 -5.0 5 24 43 62 81 100 Frequency (MHz) Frequency (MHz) Return loss: Input 0 -5 -10 -15 Isolation 0 -5 -10 -15 dB dB -20 -25 -30 -35 -40 5 24 43 62 81 100 -20 -25 -30 -35 -40 5 24 43 62 81 100 Frequency (MHz) Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.