MAPDCT0027

MAPDCT0027 2 Way 0º Power Divider 5-1000MHz Features • • • • • • SMT unit 2 Way 0 degree 260°C Reflow Compatible RoHS* Compliant RoHS version of MACPES0007 Available on Tape and Reel. Rev. V3 Schematic Description M/A-COM Technology Solutions MAPDCT0027 is 2 way 0 degree RF power divider in a low cost, surface mount package. An external 180 Ohm resistor is required between the two outputs ports. Ideally suited for high volume CATV/Broadband applications. Component Dimensions: Pin Configuration Pin No. 1 2 3 4 5 6 Function Ground Not connected (ground) Output 2 Output 1 Not connected (ground) Input Dimensions in inches [mm]. Tolerance where not specified: .xx ± .02, .xxx ± .010 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0027 2 Way 0º Power Divider 5-1000MHz Rev. V3 Electrical Specifications: TA = 25°C, Z0 = 75Ω 1 Parameter Insertion Loss Amplitude Unbalance (Nominal 0dB) Phase Unbalance (Nominal 180º) Return Loss: Input Test Conditions Frequency 5 - 500 MHz 500 - 1000 MHz 5 - 500 MHz 500 - 1000 MHz 5 - 1000 MHz 5 - 700 MHz 700 - 870 MHz 870 - 1000 MHz 5 - 40 MHz 40 - 1000 MHz 5 - 500 MHz 500 - 1000 MHz Units dB dB dB dB º dB dB dB dB dB dB dB Min 25 22 18 15 19 20 15 Typ 0.4 0.7 0.28 0.32 1.00 33 30 26 24 25 27 20 Max 0.7 1.0 ± 0.4 ± 0.6 ± 3.0 - Return Loss: Output Isolation (between outputs) - Recommended Maximum Ratings 1,2 Parameter Max Input Power DC current Operating Temperature Storage Temperature Value 1W 240mA -40°C to +85°C -55°C to +100°C Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0027 2 Way 0º Power Divider 5-1000MHz Typical Performance Curves: TA = 25°C, Z0 = 75Ω 1 Insertion Loss 0.0 -0.1 -0.2 -0.3 -0.4 Rev. V3 Isolation 0 -5 -1 0 -1 5 dB dB -0.5 -0.6 -0.7 -0.8 -0.9 - 1.0 5 204 403 602 801 1000 -20 -25 -30 -35 -40 5 204 403 602 801 1 000 Frequency (MHz) Frequency (MHz) Amplitude Unbalance 1.0 0.8 0.6 0.4 0.2 Phase Unbalance 2.0 1.5 1.0 degrees 0.5 0.0 -0.5 -1.0 -1.5 -2.0 5 204 403 602 801 1000 dB 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 5 204 403 602 801 1000 F re que nc y ( M H z) F re que nc y ( M H z) Return Loss: Input 0 -5 -10 -15 Return Loss: Output 0 -5 -10 -15 dB -20 -25 -30 -35 -40 5 204 403 602 801 1000 dB -20 -25 -30 -35 -40 5 204 403 602 801 1000 F re que nc y ( M H z) F requenc y ( M H z) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0027 2 Way 0º Power Divider 5-1000MHz Tape Specification: Rev. V3 Item Ao Bo Ko W P1 Dimension 6.70mm +/-0.1mm 7.50mm +/-0.1mm 3.60mm +/-0.1mm 16.00mm +/-0.3mm 12.00mm +/-0.1mm Ordering Information Part Number MAPDCT0027TR Package 900 piece reel 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.