MASW-000834_13560T_V8

MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Features • • • • • • • • Exceptional Broadband Performance, 0.05 - 6.0 GHz Low Loss: TX = 0.33 dB @ 2010 MHz, 5V / 20mA Low Loss: TX = 0.38 dB @ 3.5 GHz, 5V / 20mA High Isolation: Rx = 44dB @ 2010 MHz, 20mA / 5V High Isolation: Rx = 36dB @ 3.5 GHz, 20mA / 5V High TX RF Input Power = 50 W C.W. @ 2010MHz High Tx RF Input Peak Power > 1000 W Suitable for Very High Power TD-SCDMA & WiMAX Applications • Surface Mount 4mm PQFN Package, RoHS* Compliant Rev. V8 Functional Diagram (TOP VIEW) (Pin 16) N/C N/C (Pin 1) GND TX GND GND ANT GND N/C N/C GND RX GND N/C N/C N/C DC2 Description and Applications The MASW-000834-13560T is a SPDT Broadband, high linearity, common anode, PIN diode T/R switch for 0.05 6.0 GHz applications, including WiMAX & WiFi. The device is provided in industry standard 4mm PQFN plastic packaging. This device incorporates a PIN diode die fabricated with M/A-COM Technology Solutions patented Silicon-Glass HMICTM process. This chip features two silicon pedestals embedded in a low loss, low dispersion glass. The diodes are formed on the top of each pedestal. The topside is fully encapsulated with silicon nitride and has an additional polymer passivation layer. These polymer protective coatings prevent damage and contamination during handling and assembly. This compact 4mm PQFN package, SPDT switch offers wideband 0.05 - 6.0 GHz performance with excellent isolation to loss ratio for both TX and RX states. The PIN diode provides 50 W typical C.W. power handling and 65 dBm IIP3 at 2010 MHz for maximum switch performance. Pin Configuration: (Center Metal Area is RF, D.C., and Thermal Ground) Pin 1 2 3 4 5 6 7 8 Function GND ANT GND N/C N/C GND RX GND Pin 9 10 11 12 13 14 15 16 Function DC2 N/C N/C N/C GND TX GND N/C Absolute Maximum Ratings 1,2 @ TA = +25 °C (unless otherwise specified) Parameter Forward Current Reverse Voltage ( RF & D.C. ) Operating Temperature Storage Temperature Junction Temperature TX Incident C.W. Power TX Peak Incident Power Absolute Maximum | 100 mA | | -200 V | -40 °C to +85 °C -55 °C to +150 °C +175 °C 50W (47 dBm) @ 2010MHz 3 Ordering Information Part Number MASW-000834-13560T MASW-000834-001SMB MADR-008851-0001TB Package Tape and Reel Sample Board Sample Board with recommended external Driver & MASW-00083413560T Switch >300 W, 5us, 1% duty 1. Exceeding these limits may cause permanent damage. 2. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 3. Baseplate Temperature must be controlled to a constant +25°C. See page 7 for derating curve. Static Sensitivity These devices are rated Class 1B Human Body. Proper ESD control techniques should be used when handling these devices. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Electrical Specifications at +25°C, Characteristic Impedance, 20mA / 5V, Z0 = 50 Ω Parameter F = 900 MHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX F = 1800 MHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX F = 2010 MHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX Input Return Loss, TX Input Return Loss, RX RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB — — 43.2 17.7 — — 0.42 0.33 44.6 19.9 32.1 24.2 0.75 0.5 — — — — RX IL Tx IL Rx ISO TX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB — — 43.7 18.4 0.40 0.32 48.9 21.4 0.72 0.49 — RX IL TX IL RX ISO TX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB — — 45.8 21.7 0.34 0.26 52.1 27.1 0.56 0.445 — — Rev. V8 Symbol 20mA / 5V Conditions Units Min. Typ. Max. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Electrical Specifications at +25°C, Characteristic Impedance, 20mA / 5V, Z0 = 50 Ω Parameter F = 2.3-2.7 GHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX Input Return Loss, TX Input Return Loss, RX F = 3.3-3.8 GHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX Input Return Loss, TX Input Return Loss, RX F = 4.9-5.9 GHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX Input Return Loss, TX Input Return Loss, RX RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB — — — — — — 0.78 0.52 26.4 11.8 20.3 24.2 — — — — — — RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB — — 33.7 13.6 — — 0.56 0.38 35.9 16.1 27.4 21.9 1.0 0.575 — — — — RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB — — 40.2 16.2 — — 0.46 0.35 41.2 18.6 30.5 22.9 0.84 0.525 — — — — Symbol 20mA / 5V Conditions Units Min. Typ. Max. Rev. V8 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω Parameter F = 900 MHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX F = 1800 MHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX F = 2010 MHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX Input Return Loss, TX Input Return Loss, RX RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB — — — — — — 0.34 0.28 45.5 20.1 33.1 24.1 — — — — — — RX IL TX IL RX ISO TX ISO See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB — — — — 0.32 0.27 50.2 21.6 — — — — RX IL TX IL RX ISO TX ISO See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB — — — — 0.27 0.22 53.3 27.4 — — — — Symbol 50mA / 25V Conditions Units Min. Typ. Max. Rev. V8 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω Parameter F = 2.3-2.7 GHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX Input Return Loss, TX Input Return Loss, RX F = 3.3-3.8 GHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX Input Return Loss, TX Input Return Loss, RX F = 4.9-5.9 GHz Insertion Loss, RX Insertion Loss, TX Isolation, ANT To RX Isolation, ANT To TX Input Return Loss, TX Input Return Loss, RX RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB — — — — — — 0.72 0.48 26.6 11.8 20.5 24.2 — — — — — — RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB — — — — — — 0.47 0.33 36.2 16.2 28.0 21.8 — — — — — — RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB — — — — — — 0.38 0.30 41.8 18.7 31.3 22.8 — — — — — — Rev. V8 Symbol 50mA / 25V Conditions Units Min. Typ. Max. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω Parameter TX Input P1dB 3 TX 2nd Harmonic TX 3rd Harmonic TX Input Third Order Intercept Point TX C.W. Input Power 3 Rev. V8 Symbol TX P1dB TX 2Fo TX 3Fo TX IIP3 TX Pinc RX Pinc tRF 50mA / 25V Conditions 2010 MHz, TX to Antenna 2010 MHz, Pin = + 30 dBm 2010 MHz, Pin = + 30 dBm Pi= +10dBm, F1 = 2010 MHz, F2 = 2020 MHz F = 2010 MHz F = 2010 MHz F = 2010 MHz ( 10-90% RF Voltage) 1MHz Rep Rate in Modulating Mode Units dBm dBc dBc dBm dBm W dBm W ns Min. — — — — — — — Typ. >45.5 80 95 >64 47 50 41.5 14 200 Max. — — — — — — — RX C.W. Input Power TX RF Switching Speed Parameter TX Input P1dB TX 2nd Harmonic TX 3rd Harmonic TX Input Third Order Intercept Point RX C.W. Input Power TX RF Switching Speed Symbol TX P1dB TX 2Fo TX 3Fo TX IIP3 RX Pinc tRF 50mA / 25V Conditions 3.5 GHz, TX to Antenna 3.5 GHz, Pin = + 30 dBm 3.5 GHz, Pin = + 30 dBm Pi= +10dBm, F1 = 3.500 GHz, F2 = 3.510 GHz F = 3.5 GHz F = 3.5 GHz ( 10-90% RF Voltage) 1MHz Rep Rate in Modulating Mode Units dBm dBc dBc dBm dBm W ns Min. — — — — — — Typ. >45 88 105 >64 40.5 11 200 Max. — — — — — — 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω Power Derating Curve, Tx Maximum C.W. Input Power (50mA Forward Bias, 2010 MHz) Rev. V8 55 Maximum C.W. Input Power (Watts ) 50 45 40 35 30 25 45 65 85 Baseplate Temperature (Degrees C) Note that this part must be held to a constant baseplate temperature to achieve the power handling results specified above. Adding a heatsink to the baseplate will improve performance to values greater than shown here. The increase in maximum input power from using a heatsink depends on the specific heatsink design. With a sample board mounted onto a heatsink of dimensions and fins shown below, this switch can handle up to 35 Watts C.W. of incident power. 7 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications TX Performance Curves at +25°C, Characteristic Impedance, Z0 = 50 Ω Rev. V8 8 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications RX Performance Curves at +25°C, Characteristic Impedance, Z0 = 50 Ω Rev. V8 9 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Bias Diagrams & Tables TX-ANT Insertion Loss RX-ANT Isolation (Pin 16) Rev. V8 RX-ANT Insertion Loss TX-ANT Isolation (Pin 16) N/C (Pin 1) GND TX GND (Pin 1) 20mA / 50mA N/C N/C GND + 5V / 25V TX GND GND ANT GND N/C N/C GND RX N/C N/C N/C GND ANT GND N/C N/C N/C - 5V / 25V + 20mA / 50mA 20mA / 50mA DC2 GND N/C N/C GND - 5V / 25V + DC2 RX GND Bias Table 1 TX Pin 14 RX Pin 7 +5V, 0 mA DC2 Pin 9 -20 mA ANT Pin 2 0V TX-ANT Insertion Loss RX-ANT Isolation RX-ANT Insertion Loss TX-ANT Isolation -20 mA +5V, 0 mA -20 mA +5V, 0 mA 0V Bias Table 2 TX Pin 14 RX Pin 7 +25V, 0 mA DC2 Pin 9 -50 mA ANT Pin 2 0V TX-ANT Insertion Loss RX-ANT Isolation RX-ANT Insertion Loss TX-ANT Isolation -50 mA +25V, 0 mA -50 mA +25V, 0 mA 0V *Note - Diode Based Products require different minimum reverse bias voltages depending on the frequency and incident power levels. More details can be found on page 11 of this datasheet. 10 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications MASW-000834 Minimum Required Reverse Bias Voltage Minimum reverse bias voltage on a PIN diode based product varies with frequency of operation and incident power levels. As a rule of thumb, a designer can always use the magnitude of the peak RF voltage or empirically locate lower bias values than the peak RF voltage magnitude. However, it has been shown that lower DC voltages can be used depending on the RF environment in which a diode is placed. In the plot below, the minimum required reverse voltage vs. frequency is shown for an incident RF power of 50 Watts. This trend line will shift lower if the incident RF power is decreased. The biasing values have not been verified through measurement at M/A-COM Technology Solutions. As a result, please use the data below as a guide only for biasing requirements as this data is based solely on generic PIN diode equations.4 Please be cautious in that lower reverse bias levels can degrade isolation and distortion in a PIN diode based product. Rev. V8 Reverse Bias Required vs. Frequency (For 50 Watt Power Handling) 80 70 60 Reverse Bias Voltage (V) 50 40 30 20 10 0 0 500 1000 Frequency (MHz) 1500 2000 4. R. Caverly and G. Hiller, “Establishing the Minimum Reverse Bias for a P-I-N Diode in a High Power Switch,” IEEE Transactions on Microwave Theory and Techniques, Vol.38, No.12, December 1990 11 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications MASW-000834 and Recommended Driver with +5V & +28V DC Power5,6,7,8,9,10,11,12 ANT Rev. V8 MADR-008851 is the recommended driver for the MASW-000834 Switch. Link to MADR-008851 Datasheet C3 27 pF 100V L1 27 nH C4 1000 pF R1 See Note 9 +5V C5 0.022 uF TX Voltage TX C1 27 pF 100V SPDT RX Voltage RX C2 27 pF 100V L2 27 nH +28V +5V L3 27 nH C8 20 pF Note 11 L4 27 nH C6 12 pF TX RX Logic Input C1 SH2 MADR-008851-000100 Switch Driver SH1 R2 See Note 10 C7 12 pF SH Current Ground Forward Bias Diode Voltage: ΔVf is ~0.9V @ 22 mA; ΔVf is ~1.0V @ 35 mA R1 is calculated by (Vcc-1.5V)/Iseries, where Iseries is the desired bias current for the series diodes. For 21 mA load current, R1 = 165 Ω @ VCC = 5.0V and 82 Ω @ VCC = 3.3V. For 32 mA load current, R1 = 110 Ω @ VCC = 5.0V and 56 Ω @ VCC= 3.3V. 7. R2 is calculated by (Vdd-1V)/Ishunt, where Ishunt is the desired forward bias current for the shunt diode. The power dissipation is calculated by Ishunt x 27V. For 20 mA of Ishunt, R2 should use a 2511, 1W, 1.3k ohm resistor. 8. C8 is already built-in for M/A-COM MASW-000834-13560T switch. 9. The voltage at the common anode will be approximately 1.5V. 10. The current in through the back-biased diodes will be the leakage current for the diodes 11. C1-C5, L1-L4, R1, R2, and the switch are discrete components that should be installed on the user’s board. It is recommended that Coilcraft 0603CS-27NXJLW or equivalent be used for L1-L4 at 2 GHz (values may vary based on the frequency). 12. There are 33 pF bypass capacitors included in the driver for the RX, TX, and SH1 ports. There are cases, especially at higher frequencies, where the optional 12 pF bypass capacitors (C6 and C7) that are shown on the schematic are needed. 5. 6. 12 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications MASW-000834-13560T Outline – 4mm PQFN 16-Lead Saw Singulated Rev. V8 † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 13 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • China Tel: +86.21.2407.1588 • India Tel: +91.80.43537383 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.