MASW-007073-000100

MASW-007073-000100 GaAs SP4T Absorptive Switch with ASIC Driver, DC-3.0 GHz Rev. V4 Features • • • • • • • • • • • • Typical Isolation: 33 dB (2,000 MHz) Typical Insertion Loss: 1.6 dB (2,000 MHz) Integral ASIC TTL/CMOS Driver Low DC Power Consumption 50 Ohm Nominal Impedance Tape and Reel Packaging Available Test Boards Available Lead-Free SOW-24 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SW65-0314 Functional Block Diagram PIN 1 RFC GND RF4 GND GND RF2 GND VEE GND PIN 24 GND RF3 GND GND RF1 GND GND GND GND C3 C1 PIN 13 Description M/A-COM's MASW-007073-000100 is a GaAs MMIC absorptive SP4T switch with an integral silicon ASIC driver. This device is in a 24-lead plastic package. This switch offers excellent broadband performance and repeatability from DC to 3 GHz, while maintaining low DC power dissipation. The MASW007073-000100 is ideally suited for wireless infrastructure applications. Also available in a ceramic package with improved performance. GND VCC C4 PIN 12 C2 Pin Configuration Pin No. Function RFC GND RF4 GND GND RF2 GND VEE GND VCC C4 C2 Pin No. 13 14 15 16 17 18 19 20 21 22 23 24 Function C1 C3 GND GND GND GND RF1 GND GND RF3 GND GND Ordering Information Part Number MASW-007073-000100 MASW-007073-0001TR MASW-007073-0001TB 1 2 Package Bulk Packaging 1000 piece reel Sample Test Board 3 4 5 6 7 8 9 10 11 12 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-007073-000100 GaAs SP4T Absorptive Switch with ASIC Driver, DC-3.0 GHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Insertion Loss Rev. V4 Test Conditions DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz Units dB dB dB dB dB dB — — — ns ns mV dBm dBm dBm dBm V V V V uA uA mA Min — — — 35 27 25 — — — — — — — — — — +4.5 -8.0 0.0 2.0 -1.0 — — On 1.3:1 1.5:1 1.7:1 Typ 1.5 1.6 2.0 38 33 27 Off 1.3:1 1.7:1 2.2:1 15 50 50 +20 +27 +35 +46 +5.0 -5.0 — — — 250 — Max 1.7 1.8 2.3 — — — 1.5:1 2.0:1 2.4:1 50 150 150 — — — — +5.5 -4.75 0.8 5.0 1.0 400 1.0 Isolation (One Arm On) VSWR Trise Tfall Toff Ton Transients 1 dB Compression Input IP3 VCC VEE VIL VIH lin (Input Leakage Current) ICC (Quiescent Supply Current) ΔICC (Additional Supply Current Per TTL Input Pin) IEE 10%/90%, 90%/10% 1 50% TTL to 90%/10% RF In-band (peak to peak) .05 GHz .5 - 3.0 GHz Two tone inputs 0.05 GHz Up to +5 dBm 0.5 - 3.0 GHz — — LOW-level input voltage HIGH-level input voltage Vin = VCC or GND Vcntrl = VCC or GND VCC = Max, Vcntrl = VCC - 2.1V VEE min to max, Vin = VIL or VIH mA -1.0 -0.2 — 1. Decoupling capacitors (.01 µF) are required on the power supply lines. Handling Procedures Please observe the following precautions to avoid damage: Absolute Maximum Ratings Parameter Max. Input Power 0.05 GHz 0.5 - 3.0 GHz4 VCC VEE VCC - VEE Vin5 Operating Temperature Storage Temperature 2,3 Absolute Maximum +27 dBm +34 dBm -0.5V ≤ VCC ≤ +7.0V -8.5V ≤ VEE ≤ +0.5V -0.5V ≤ VCC - VEE ≤ 14.5V -0.5V ≤ Vin ≤ VCC + 0.5V -40ºC to +85ºC -65ºC to +125ºC Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. When the RF input is applied to the terminated port, the absolute maximum power is +30 dBm. 5. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-007073-000100 GaAs SP4T Absorptive Switch with ASIC Driver, DC-3.0 GHz Truth Table TTL Control Input C1 1 0 0 0 C2 0 1 0 0 C3 0 0 1 0 C4 0 0 0 1 Rev. V4 RF Common To: RF1 On Off Off Off RF2 Off On Off Off RF3 Off Off On Off RF4 Off Off Off On 0 = TTL Low; 1 = TTL High Typical Performance Curves Insertion Loss vs. Frequency 2.0 Isolation Loss vs. Frequency 90 80 Insertion Loss (dB) 1.5 70 Isolation (dB) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 60 50 40 30 20 1.0 0.5 0.0 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) -55C 25C 85C Frequency (GHz) RFC VSWR vs. Frequency 2.2 RF1-RF4 VSWR vs. Frequency 2.2 2.0 2.0 RF1 - RF4 VSWR 1.8 1.8 1.6 1.4 1.2 RFC VSWR 1.6 1.4 1.2 1.0 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) ON OFF Frequency (GHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-007073-000100 GaAs SP4T Absorptive Switch with ASIC Driver, DC-3.0 GHz Lead-Free, SOW-24† Rev. V4 † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.