MASW-009590-000DIE

MASW-009590-000DIE Bumped GaAs SPDT Switch DC - 8.0 GHz Features • • • • • • • 802.11a + b/g and MIMO Applications Test and Measurement and Low/Medium Power Telecommunication Applications up to 8.0 GHz Broadband Performance: DC - 8.0 GHz Low Insertion Loss: 0.5 dB from 2.0 - 6.0 GHz Ultra-Small Form Factor: 0.605 x 0.485 mm Fast Settling for Low Gate Lag Requirements RoHS* Compliant Rev. V1 Die Bump Pad Layout (bump side up) Description The MASW-009590-000DIE is a broadband bumped GaAs pHEMT MMIC SPDT switch. Typical applications are for WLAN IEEE 802.11a + b/g, and MIMO. This switch is designed specifically for dual band wireless LAN modules where size constraints are critical. Designed for low insertion loss, this SPDT switch maintains low loss up to 8.0 GHz. The MASW-009590-000DIE is fabricated using M/A-COM Technology Solutions’ proprietary GaAs pHEMT process, designed for ultra-fast high linearity switching applications. The process features full passivation for performance and reliability. Die Bump Pad Configuration Name VC1 RFC VC2 RF2 GND RF1 Description Voltage Control 1 RF Common Voltage Control 2 RF Output 2 Ground RF Output 1 Ordering Information Part Number MASW-009590-000DIE1 MASW-009590-000D3K2 Package Separated Die on Grip Ring Die in 3000 piece reel Absolute Maximum Ratings 3,4 Parameter Input Power @ 3 V Control Input Power @ 5 V Control Operating Voltage Operating Temperature Storage Temperature Absolute Maximum +32 dBm +33 dBm +8.5 volts -40°C to +85°C -65°C to +150°C 1. Die quantity varies. 2. Reference Application Note M513 for reel size information. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-009590-000DIE Bumped GaAs SPDT Switch DC - 8.0 GHz Electrical Specifications: TA = 25°C, Z0 = 50 Ω, VC = 0 V / 3 V, 22 pF Capacitor 5,6 Parameter Insertion Loss 7 Test Conditions 2.0 - 6.0 GHz 6.0 - 8.0 GHz 2.4 GHz 5.3 GHz 5.8 GHz 6.0 - 8.0 GHz DC - 8.0 GHz Two Tone, +15 dBm / Tone, 10 MHz Spacing 6.0 GHz Two Tone, +15 dBm / Tone, 10 MHz Spacing 6.0 GHz 2.4 - 5.8 GHz 2.4 - 5.8 GHz 10% to 90% RF and 90% to 10% RF 50% control to 90% RF and 50% control to 10% RF Units dB Min. — — 26.5 21 20 — — — — — — — — — — — Typ. 0.50 0.55 27.5 22 21 18 18 85 52 26 30 13 18 24 27 1 Max. 0.80 — — — — — — — — — — — — — — 5 Rev. V1 Isolation dB Return Loss Input IP2 Input IP3 Input P0.1dB Input P1dB T-rise, T-fall Ton, Toff Transients Gate Lag Control Current dB dBm dBm dBm dBm ns ns mV 10% RF to 97.5% RF |VC| = 3 V ns µA 5. For positive voltage control, external DC blocking capacitors are required on all RF ports. 6. Electrical minimum and maximum specifications are guaranteed in final package assembly only. 7. Insertion loss can be optimized by varying the DC blocking capacitor value. Truth Table 8 Control VC1 Control VC2 1 0 0 1 RFC– RF1 On Off RFC—RF2 Off On 8. 1 = +1.8 V (for (Vhi-Vlo) < 1.8V, add a 20K Ω pull up resistor from RFC to Vhi) to +5 V, 0 = 0 V + 0.2 V. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-009590-000DIE Bumped GaAs SPDT Switch DC - 8.0 GHz Typical Performance Curves (plots = chip on board assembly) Insertion Loss 0.0 Rev. V1 Isolation -15 -0.2 -20 -0.4 -25 -0.6 -30 -0.8 -1.0 1 2 3 4 5 6 7 8 -35 1 2 3 4 5 6 7 8 Frequency (GHz) Frequency (GHz) Input Return Loss 0 -5 -10 -15 -20 -25 -30 1 2 3 4 5 6 7 8 Application Schematic C1, C2, C3 = 22pF R1, R2 = 500 Ω9 Frequency (GHz) Handling Procedures Please observe the following precautions to avoid damage: 9. Resistors R1 and R2 are optional, acting to improve 8 GHz Insertion Loss. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-009590-000DIE Bumped GaAs SPDT Switch DC - 8.0 GHz Die Dimensions (Top and Side Views) PCB Top Metal / Solder Mask Rev. V1 Die Bump Pad Layout - Top View (bump side up) Die Bump Pad Layout - Bottom View (bump side down - as installed on board) 10 10. Orientation mark is only on material that is shipped in tape and reel. The mark is not available on die shipped on grip ring. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.