MASWCC0010-TB

MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Features • • • • • • • • • • • • Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Leadless 4 x 7 mm Chip Scale Plastic Package Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel is Available Lead-Free CSP-2 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SW90-0003 Rev. V4 Pin Configuration2, 3, 4 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Function CP2 Vee NC1 C4 C3 C2 C1 NC NC 1 1 Pin No. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Function GND NC1 GND RFC GND NC1 RF3 GND NC1 GND RF4 GND NC1 Vee Vcc NC1 Vcc CP1 Description M/A-COM's MASWCC0010 is a SP4T absorptive pHEMT switch with integral TTL driver. This device is in an MLP plastic surface mount package. This switch offers excellent broadband performance and repeatability from DC to 4 GHz, while maintaining low DC power dissipation. The MASWCC0010 is ideally suited for wireless infrastructure applications. NC1 NC NC 1 1 GND RF1 GND NC1 GND RF2 Ordering Information 1. 2. 18 Part Number MASWCC0010 MASWCC0010TR MASWCC0010-TB Package Bulk Packaging 1000 piece reel Sample Test Board 4. 3. NC = No Connection For single supply operation VEE is internally generated and must remain isolated from external power supplies. Generated noise is typical of switching DC-DC converters. Connections and external components shown in functional schematic are required. 0.1µF Capacitors need to be located near pins 32 & 33. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Electrical Specifications: TA = 25°C Parameter Insertion Loss Isolation VSWR Rev. V4 Test Conditions RFC-RF1, 2, 3, 4 — On (RFC, RF1-RF4) Logic per Truth Table Off (RF1-RF4) Logic per Truth Table — — Two-tone inputs up to +5 dBm Ton (50% Control to 90% RF) Toff (50% Control to 10% RF) Trise (10% to 90% RF) Tfall (90% to 10% RF) Frequency DC - 4.0 GHz DC - 4.0 GHz DC - 4.0 GHz DC - 4.0 GHz 50 MHz 0.5 - 4.0 GHz 50 MHz 0.5-4.0 GHz — — — — — — — — — Units dB dB Ratio Ratio dBm dBm dBm dBm ns ns ns ns V V V uA mA uA Min. — 38 — — — — — — — — — — 4.5 0.0 2.0 -1.0 — — — — Typ. — — — — +15 +27 30 40 35 20 12 2 5.0 — — — 5 250 — — Max. 2.3 — 2.0:1 2.0:1 — — — — — — — — 5.5 0.8 5.0 1.0 8 400 125 1.0 1 dB Compression Input IP3 Switching Speed Vcc VIL VIH lin (Input Leakage Current) Icc 5,7 8 — LOW-level input voltage HIGH-level input voltage Vin = VCC or GND Vcc min to max, Logic “0” or “1” Vcntrl = VCC or GND For guaranteed start-up VCC = Max, Vcntrl = VCC - 2.1 V Icc (Quiescent Supply Current) Turn-on Current6 ΔIcc (Additional Supply Current Per TTL Input Pin) Switching Noise — — mA mA Generated from DC-DC Converter with recommended capacitors — 3.5 MHz dBm — -93 — Thermal Resistance θjc 5. 6. 7. 8. — °C/W — 15 — During turn-on, the device requires an initial start up current (Icc) specified as “Turn-on Current”. Once operational, Icc will drop to the specified levels. This is not applicable to dual supply operation. The DC-DC converter is guaranteed to start in 100 µs as long as the power supplies have the maximum turn-on current available for start-up. For single supply operation For dual supply operation 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Truth Table (Switch) Absolute Maximum Ratings9,10 Parameter Max. Input Power 0.05 GHz 0.5 - 4.0 GHz11 VCC7 VCC8 VEE8 VCC VEE8 Vin12 Operating Temperature Storage Temperature 9. Rev. V4 C1 1 0 0 0 C2 0 1 0 0 C3 0 0 1 0 C4 0 0 0 1 Absolute Maximum +27 dBm +34 dBm -0.5V ≤ VCC ≤ +6.0V -0.5V ≤ VCC ≤ +7.0V -8.5V ≤ VEE ≤ +0.5V -0.5V ≤ VCC - VEE ≤ 14.5V -0.5V ≤ Vin ≤ VCC + 0.5V -40ºC to +85ºC -65ºC to +125ºC RFCRF1 On Off Off Off RFC- RFC- RFCRF2 RF3 RF4 Off On Off Off Off Off On Off Off Off Off On “0” = TTL Low “1” = TTL High Handling Procedures Please observe the following precautions to avoid damage: Exceeding any one or combination of these limits may cause permanent damage to this device. 10. M/A-COM does not recommend sustained operation near these survivability limits. 11. When the RF input is applied to the terminated port, the absolute maximum power is +30 dBm. 12. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Recommended PCB Configuration13 13. Application Note C2083 is available on line at www.macomtech.com 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Functional Schematic Rev. V4 Typical Performance Curves Insertion Loss vs. Frequency Isolation (dB) vs. Frequency - 4 0 °C 3.0 + 2 5 °C + 8 5 °C R F n- R F m 90 RFC-RFn Insertion Loss (dB) 2.5 2.0 1.5 1.0 0.5 0 .0 0 1000 2000 3000 4000 75 Isolation (dB) 60 45 30 15 0 0 1000 2000 3000 4000 F re que nc y ( M H z) F re que nc y ( M H z) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Typical Performance Curves On VSWR vs. Frequency VSWR (Terminations) vs. Frequency Rev. V4 R F O U T ( O n) 2.00 1 .80 RFC R F OU T ( Of f ) 2.00 1.80 VSW R VSWR 1 .60 1 .40 1 .20 1 .00 0 1 000 2000 3000 4000 1.60 1.40 1.20 1.00 0 1000 2000 3000 4000 F re que nc y ( M H z) F requency (M H z) CSP-2, Lead-Free, 4 x 7 mm, 36-lead, PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.