0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
MASWCC0010TR

MASWCC0010TR

  • 厂商:

    MA-COM

  • 封装:

  • 描述:

    MASWCC0010TR - GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz - M/A-COM Technology Solutio...

  • 详情介绍
  • 数据手册
  • 价格&库存
MASWCC0010TR 数据手册
MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Features • • • • • • • • • • • • Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Leadless 4 x 7 mm Chip Scale Plastic Package Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel is Available Lead-Free CSP-2 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SW90-0003 Rev. V4 Pin Configuration2, 3, 4 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Function CP2 Vee NC1 C4 C3 C2 C1 NC NC 1 1 Pin No. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Function GND NC1 GND RFC GND NC1 RF3 GND NC1 GND RF4 GND NC1 Vee Vcc NC1 Vcc CP1 Description M/A-COM's MASWCC0010 is a SP4T absorptive pHEMT switch with integral TTL driver. This device is in an MLP plastic surface mount package. This switch offers excellent broadband performance and repeatability from DC to 4 GHz, while maintaining low DC power dissipation. The MASWCC0010 is ideally suited for wireless infrastructure applications. NC1 NC NC 1 1 GND RF1 GND NC1 GND RF2 Ordering Information 1. 2. 18 Part Number MASWCC0010 MASWCC0010TR MASWCC0010-TB Package Bulk Packaging 1000 piece reel Sample Test Board 4. 3. NC = No Connection For single supply operation VEE is internally generated and must remain isolated from external power supplies. Generated noise is typical of switching DC-DC converters. Connections and external components shown in functional schematic are required. 0.1µF Capacitors need to be located near pins 32 & 33. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Electrical Specifications: TA = 25°C Parameter Insertion Loss Isolation VSWR Rev. V4 Test Conditions RFC-RF1, 2, 3, 4 — On (RFC, RF1-RF4) Logic per Truth Table Off (RF1-RF4) Logic per Truth Table — — Two-tone inputs up to +5 dBm Ton (50% Control to 90% RF) Toff (50% Control to 10% RF) Trise (10% to 90% RF) Tfall (90% to 10% RF) Frequency DC - 4.0 GHz DC - 4.0 GHz DC - 4.0 GHz DC - 4.0 GHz 50 MHz 0.5 - 4.0 GHz 50 MHz 0.5-4.0 GHz — — — — — — — — — Units dB dB Ratio Ratio dBm dBm dBm dBm ns ns ns ns V V V uA mA uA Min. — 38 — — — — — — — — — — 4.5 0.0 2.0 -1.0 — — — — Typ. — — — — +15 +27 30 40 35 20 12 2 5.0 — — — 5 250 — — Max. 2.3 — 2.0:1 2.0:1 — — — — — — — — 5.5 0.8 5.0 1.0 8 400 125 1.0 1 dB Compression Input IP3 Switching Speed Vcc VIL VIH lin (Input Leakage Current) Icc 5,7 8 — LOW-level input voltage HIGH-level input voltage Vin = VCC or GND Vcc min to max, Logic “0” or “1” Vcntrl = VCC or GND For guaranteed start-up VCC = Max, Vcntrl = VCC - 2.1 V Icc (Quiescent Supply Current) Turn-on Current6 ΔIcc (Additional Supply Current Per TTL Input Pin) Switching Noise — — mA mA Generated from DC-DC Converter with recommended capacitors — 3.5 MHz dBm — -93 — Thermal Resistance θjc 5. 6. 7. 8. — °C/W — 15 — During turn-on, the device requires an initial start up current (Icc) specified as “Turn-on Current”. Once operational, Icc will drop to the specified levels. This is not applicable to dual supply operation. The DC-DC converter is guaranteed to start in 100 µs as long as the power supplies have the maximum turn-on current available for start-up. For single supply operation For dual supply operation 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Truth Table (Switch) Absolute Maximum Ratings9,10 Parameter Max. Input Power 0.05 GHz 0.5 - 4.0 GHz11 VCC7 VCC8 VEE8 VCC VEE8 Vin12 Operating Temperature Storage Temperature 9. Rev. V4 C1 1 0 0 0 C2 0 1 0 0 C3 0 0 1 0 C4 0 0 0 1 Absolute Maximum +27 dBm +34 dBm -0.5V ≤ VCC ≤ +6.0V -0.5V ≤ VCC ≤ +7.0V -8.5V ≤ VEE ≤ +0.5V -0.5V ≤ VCC - VEE ≤ 14.5V -0.5V ≤ Vin ≤ VCC + 0.5V -40ºC to +85ºC -65ºC to +125ºC RFCRF1 On Off Off Off RFC- RFC- RFCRF2 RF3 RF4 Off On Off Off Off Off On Off Off Off Off On “0” = TTL Low “1” = TTL High Handling Procedures Please observe the following precautions to avoid damage: Exceeding any one or combination of these limits may cause permanent damage to this device. 10. M/A-COM does not recommend sustained operation near these survivability limits. 11. When the RF input is applied to the terminated port, the absolute maximum power is +30 dBm. 12. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Recommended PCB Configuration13 13. Application Note C2083 is available on line at www.macomtech.com 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Functional Schematic Rev. V4 Typical Performance Curves Insertion Loss vs. Frequency Isolation (dB) vs. Frequency - 4 0 °C 3.0 + 2 5 °C + 8 5 °C R F n- R F m 90 RFC-RFn Insertion Loss (dB) 2.5 2.0 1.5 1.0 0.5 0 .0 0 1000 2000 3000 4000 75 Isolation (dB) 60 45 30 15 0 0 1000 2000 3000 4000 F re que nc y ( M H z) F re que nc y ( M H z) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply DC - 4.0 GHz Typical Performance Curves On VSWR vs. Frequency VSWR (Terminations) vs. Frequency Rev. V4 R F O U T ( O n) 2.00 1 .80 RFC R F OU T ( Of f ) 2.00 1.80 VSW R VSWR 1 .60 1 .40 1 .20 1 .00 0 1 000 2000 3000 4000 1.60 1.40 1.20 1.00 0 1000 2000 3000 4000 F re que nc y ( M H z) F requency (M H z) CSP-2, Lead-Free, 4 x 7 mm, 36-lead, PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.
MASWCC0010TR
1. 物料型号: - MASWCC0010 Bulk Packaging - MASWCC0010TR 1000 piece reel - MASWCC0010-TB Sample Test Board

2. 器件简介: - MASWCC0010是M/A-COM公司生产的SP4T absorptive pHEMT开关,集成了TTL驱动器。该器件采用MLP塑料表面贴装封装,提供从直流到4 GHz的宽带性能和可重复性,同时保持低直流功耗。MASWCC0010非常适合无线基础设施应用。

3. 引脚分配: - 引脚1至引脚36的功能分配详细列出,包括控制引脚(C1-C4)、电源引脚(Vee、Vcc)、射频引脚(RF1-RF4)和地(GND)等。

4. 参数特性: - 插入损耗:在DC-4.0 GHz范围内,插入损耗典型值为2.3 dB。 - 隔离度:在DC-4.0 GHz范围内,隔离度典型值为38 dB。 - 电压驻波比(VSWR):在DC-4.0 GHz范围内,VSWR典型值为1.2:1。 - 1 dB压缩点:在50MHz和0.5-4.0 GHz范围内,1 dB压缩点分别为+15 dBm和+27 dBm。 - 输入IP3:在50 MHz和0.5-4.0 GHz范围内,输入IP3分别为30 dBm和40 dBm。 - 切换速度:包括Ton、Toff、Trise和Tfall等参数,典型值分别为35 ns、20 ns、12 ns和2 ns。

5. 功能详解: - 该开关为单电源操作设计,VEE内部生成,必须与外部电源隔离。需要0.1µF电容器靠近引脚32和33。封装底部中心的暴露垫必须连接到RF和DC地。

6. 应用信息: - 该器件非常适合无线基础设施应用。

7. 封装信息: - 封装类型为CSP-2, 无铅,4 x 7 mm,36引脚PQFN。 - 提供了封装的具体尺寸和公差信息,并建议参考应用说明M538以获取无铅焊接回流的建议。
MASWCC0010TR 价格&库存

很抱歉,暂时无法提供与“MASWCC0010TR”相匹配的价格&库存,您可以联系我们找货

免费人工找货