MASWSS0115SMB

MASWSS0115 GaAs SPDT Switch DC - 3.0 GHz Features • • • • • • • Insertion Loss: 0.3 dB @ 2.4 GHz Isolation: 22 dB @ 2.4 GHz Power Consumption: 50 MHz Two Tone, +5 dBm/tone, 5 MHz Spacing, >50 MHz VC = 0 V/2.5 V VC = 0 V/3.0 V 10% to 90% RF, 90% to 10% RF 50% control to 90% RF, 50% control to 10% RF In band VC = 2.5 V Units dB dB dB dB dB dBm dBm dBm dBm ns ns mV µA Min. — — 20 — — — — — — — — — — Typ. 0.25 0.30 24 22 20 90 46 21 25 35 40 10 5 Max. 0.40 0.55 — — — — — — — — — — 20 Rev. V6 6. External DC blocking capacitors are required on all RF ports. 7. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 - 3 GHz. Truth Table 8,9 Control V1 0 1 Control V2 1 0 RFC-RF1 On Off RFC-RF2 Off On Die Bond Pad Layout 8. Differential voltage, V(state 1) - V(state 0), must be +2.3 V minimum. 9. 0 = 0 V ± 0.2 V, 1 = +2.3 V to 5.0 V Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0115 GaAs SPDT Switch DC - 3.0 GHz Typical Performance Curves Return Loss vs. Frequency 0 +25°C +85°C -40°C Rev. V6 Isolation vs. Frequency 30 +25°C +85°C -40°C 10 28 20 26 30 24 40 22 50 0.5 1.0 1.5 2.0 2.5 3.0 20 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency 0.5 +25°C +85°C -40°C Input P1dB Compression vs. Control Voltage @ 2.4 GHz, T=+25°C 35 0.4 30 0.3 25 0.2 0.1 20 No pull-up 10 With pull-up 0 0.5 15 1.0 1.5 2.0 2.5 3.0 0 1 2 3 4 5 6 Frequency (GHz) Control Voltage (Vdc) 10. RFC port is pulled up with a 5.1K resistor to fixed VDD equal VCTL high level. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0115 GaAs SPDT Switch DC - 3.0 GHz Lead-Free SC-70 (SOT-363)† Rev. V6 † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.