MASWSS0175

MASWSS0175 GaAs DPDT Diversity Switch DC - 6.0 GHz Features • • • • • • • • • Low Insertion Loss: 0.8 dB at 5.2 GHz Ideal for WLAN IEEE 802.11a 0.5 micron GaAs PHEMT Process Integrated DC Blocking Capacitors Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MASWSS0039 Rev. V1 Functional Schematic Port 1 N/C N/C PIN 1 Ctrl 1 Port 3 Ctrl 4 Ctrl 2 Port 4 Ctrl 3 Description M/A-COM’s MASWSS0175 is a GaAs PHEMT MMIC DPDT diversity switch in a lead-free 3 mm 12lead PQFN package. It is designed for low insertion loss and allows for independent control and selection of each switch path. It integrates blocking capacitors on all RF ports and thus eliminates the need for additional off-chip DC blocking capacitors. The MASWSS0175 is ideally suited for applications where very small size and low cost are required. Typical applications are for WLAN IEEE 802.11a systems that employ two antennas for transmit and receive diversity. This part can be used in all systems operating between 4.5 GHz and 6.0 GHz requiring moderate power and diversity switching. The MASWSS0175 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Port 2 N/C Pin Configuration 2 Pin No. 1 2 3 4 5 6 7 Pin Name Ctrl 1 Port 3 Ctrl 4 N/C Port 2 N/C Ctrl 3 Port 4 Ctrl 2 N/C Port 1 N/C Paddle 2 N/C Description Control 1 RF Port 3 Control 4 No Connection RF Port 2 No Connection Control 3 RF Port 4 Control 2 No Connection RF Port 1 No Connection RF and DC Ground Ordering Information 1 Part Number MASWSS0175 MASWSS0175TR-3000 MASWSS0175SMB 8 Package Bulk Packaging 3000 Piece Reel Sample Test Board 9 10 11 12 13 1. Reference Application Note M513 for reel size information. 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0175 GaAs DPDT Diversity Switch DC - 6.0 GHz Electrical Specifications: TA = 25°C, Z0 = 50 Ω, VC = 0 V / 3 V Parameter Insertion Loss Rev. V1 Test Conditions 4.9 GHz 5.2 GHz 5.8 GHz 4.9 GHz 5.2 GHz 5.8 GHz 4.5 - 6.0 GHz 5.2 GHz, VC = 2.7 V 5.2 GHz, VC = 3.0 V 5.2 GHz, VC = 5.0 V Two Tone, +15 dBm / tone, 5 MHz Spacing 5.2 GHz Two Tone, +15 dBm / tone, 5 MHz Spacing 5.2 GHz, VC = 3 V 5.2 GHz, VC = 5 V 5.2 GHz, PIN = 20 dBm 5.2 GHz, PIN = 20 dBm 10% to 90% RF and 90% to 10% RF 50% Control to 90% RF 50% Control to 10% RF |VC| = 3 V Units dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBc dBc nS nS nS µA Min. — — — 15 20 20 15 — — — — — — — — — — — — Typ. 0.9 0.8 0.8 20 25 29 25 31 33 39 98 52 55 -85 -83 20 35 40 5 Max. 1.3 1.2 1.2 — — — — — — — — — — — — — — — 25 Isolation Return Loss P1dB IP2 IP3 2nd Harmonic 3 Harmonic Trise, Tfall Ton, Toff Control Current rd Absolute Maximum Ratings 3,4 Parameter Input Power @ 3 V Control Input Power @ 5 V Control Operating Voltage Operating Temperature Storage Temperature Handling Procedures Please observe the following precautions to avoid damage: Absolute Maximum +32 dBm +36 dBm +8.5 volts -40 C to +85 C -65°C to +150°C ° ° Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0175 GaAs DPDT Diversity Switch DC - 6.0 GHz Typical Performance Curves Insertion Loss 1.2 Rev. V1 Isolation 35 1.0 30 25 20 15 +25°C -40°C +85°C 0.8 0.6 0.4 +25°C -40°C +85°C 10 5 0.2 0.0 4.5 5.0 5.5 6.0 0 4.5 5.0 5.5 6.0 Frequency (GHz) Frequency (GHz) Return Loss 0 -5 -10 +25°C -40°C +85°C Circuit Block Diagram** C1 C2 -15 -20 -25 C4 C3 -30 4.5 5.0 5.5 6.0 Frequency (GHz) C1 – C4 = 47pF, Logic Control Decoupling Capacitors. ** Internal blocking capacitors are located on Port 1-Port 4. Truth Table 4,5 Control V1 1 0 0 0 1 0 Control V2 0 1 0 0 0 1 Control V3 0 0 1 0 1 0 Control V4 0 0 0 1 0 1 Port 1 Port 3 On Off Off Off On Off Port 1 Port 4 Off On Off Off Off On Port 2 Port 4 Off Off On Off On Off Port 2 Port 3 Off Off Off On Off On 4. 1 = +2.5 V to +5 V, 0 = 0 V + 0.2 V. 5. Differential voltage, V (state 1) - V (state 0), must be 2.5 V minimum and must not exceed 8 V. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0175 GaAs DPDT Diversity Switch DC - 6.0 GHz Lead-Free 3 mm 12-Lead PQFN† Rev. V1 † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.