MASWSS0191

MASWSS0191 GaAs SP3T 2.6 V CDMA-GPS Switch 0.5 - 3.0 GHz Features • • • • • • • • • Optimized RF Paths Low Cross Modulation Low Insertion Loss: 0.7 dB at 820 MHz (Cell) High Isolation: 21.5 dB at 1.9 GHz (PCS) 0.5 micron GaAs PHEMT Process Lead-Free 2 mm 8-lead STDFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Rev. V1 Functional Block Diagram Description M/A-COM’s MASWSS0191 is an industry leading GaAs PHEMT MMIC single pole three throw (SP3T) CDMA-GPS switch in a 2 mm 8-lead STDFN package. The MASWSS0191 is uniquely configured to enable switching from a common antenna port to CDMA cellular, CDMA PCS, or GPS ports. The design is asymmetric and has been fully optimized for excellent cross modulation performance in CELL and PCS paths while still maintaining excellent insertion loss and isolation. The MASWSS0191 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Pin Configuration Pin No. 1 2 3 4 5 6 7 8 9 2. Pin Name N/C V3 ANT V1 GPS PCS V2 CELL GND (paddle) 2 Description No Connection Control 3 Antenna Port Control 1 GPS Receive PCS Transmit/Receive Control 2 Cellular Transmit/Receive RF & DC Ground Ordering Information Part Number MASWSS0191TR-3000 MASWSS0191SMB 1 The exposed pad centered on the package bottom must be connected to RF and DC ground. Package 3000 Piece Reel Sample Test Board (Includes 5 Samples) Absolute Maximum Ratings 3,4 Parameter Input Power (0.5 - 3.0 GHz, 2.6 V Control) Operating Voltage Operating Temperature Storage Temperature 3. 4. Absolute Maximum +35 dBm +8.5 volts -40°C to +85°C -65°C to +150°C 1. Reference Application Note M513 for reel size information. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0191 GaAs SP3T 2.6 V CDMA-GPS Switch 0.5 - 3.0 GHz Electrical Specifications: TA = 25°C, VC = 0 V / 2.6 V5, Z0 = 50 Ω Parameter Insertion Loss 6 (CELL Path) Rev. V1 Test Conditions 820 MHz 1.5 GHz 1.9 GHz 820 MHz 1.5 GHz 1.9 GHz 820 MHz 1.5 GHz 1.9 GHz 820 MHz 1.5 GHz 1.9 GHz 820 MHz 1.5 GHz 1.9 GHz 820 MHz 1.5 GHz 1.9 GHz All RF ports, DC – 2.5 GHz Two Tones +22 dBm / tone, 1 MHz Spacing, 820 MHz Two Tones +22 dBm / tone, 1 MHz Spacing, 1880 MHz Cell Band: Two-tone signal input: Tx1 = +22 dBm @ 820 MHz, Tx2 = +22 dBm @ 821 MHz, RX interfere = -30 dBm @ 869 MHz. PCS Band: Two-tone signal input: Tx1 = +18 dBm @ 1880 MHz, Tx2 = +18 dBm @ 1881 MHz, RX interfere = -30 dBm @ 1960 MHz. 820 MHz 1.5 GHz 1.9 GHz 10% to 90% RF, 90% to 10% RF 50% control to 90% RF, and 50% control to 10% RF In Band |VC| = 2.6 V Units dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm Min. — — — — — — — — — 30.0 — — 29.0 — — 25.0 — — — — — — Typ. 0.65 0.70 0.70 0.95 0.95 0.95 0.65 0.70 0.65 32.0 27.0 24.5 31.0 26.0 23.5 27.0 23.5 21.5 20 58 59 -113 Max. 0.80 — — 1.1 — — 0.8 — — — — — — — — — — — — — — — Insertion Loss 6 (GPS Path) Insertion Loss 6 (PCS Path) Isolation (CELL Path) Isolation (GPS Path) Isolation (PCS Path) Return Loss IP3 CELL Path PCS Path Cross Modulation CELL Path Cross Modulation PCS Path P0.1 dB CELL Path GPS Path PCS Path Trise, Tfall Ton, Toff Transients Control Current 5. 6. dBm — -115 — dBm dBm dBm µS µS mV µA — — — — — — — 37 35 35 0.05 0.07 50 2 — — — — — — 20 For positive voltage control, external DC blocking capacitors are required on all RF ports. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0191 GaAs SP3T 2.6 V CDMA-GPS Switch 0.5 - 3.0 GHz Typical Performance Curves Insertion Loss 2.0 Rev. V1 Isolation 40 35 1.5 GPS PCS CELL 30 25 GPS PCS CELL 1.0 20 15 0.5 10 5 0.0 0 1 2 3 4 5 6 0 0 1 2 3 4 5 6 Frequency (GHz) Frequency (GHz) Truth Table 7,8 V1 1 0 0 7. 8. Handling Procedures V3 0 0 1 V2 0 1 0 ANT– GPS On Off Off ANT PCS Off On Off ANT CELL Off Off On Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrted Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Differential voltage, V (state 1) - V (state 0), must be +2.6 V minimum, but must not exceed +8.5 V. 0 = -5 V to +2.4 V, 1 = -2.4 V to +5 V. Lead-Free 2 mm 8-Lead STDFN† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.