MAVC-010000-002196

MAVC-010000-002196 VCO, SMT 2146-2246 MHz Features • • • • High Performance, Low Cost Low Phase Noise Miniature SMT Package (LSM1) RoHS Compliant Rev. Preliminary Description This VCO, in a SMT package, provides electrical shielding, easy PCB assembly and repeatable performance. The oscillator is designed for use in wireless base stations and other applications. M/A-COM VCOs are manufactured in an ISO9001 certified facility, incorporating surface mount assembly and automated electrical testing. This ensures consistent electrical performance and quality over volume production quantities. Devices are designed to function after exposure to the shock, vibration, thermal shock and moisture conditions typically encountered in base station and other infrastructure environments. Pin Configuration Pin No. 1 2 Function RF Output VCC Vtune GND Electrical Specifications1: Z0 = 50 Ohms, Vcc = 5V. Parameter Frequency Range RF Output Power Tuning Voltage Phase Noise 3 4 Test Conditions Over Top 2 2 Units MHz dBm V dBc/Hz Min 2146 +3.0 +0 Typ Max 2246 Over VCC and Top Over Top 2 +6 +9.0 +5 SSB at 10 kHz offset from carrier SSB at 100 kHz offset from carrier SSB at 1000 kHz offset from carrier -100 -120 -140 30 -15 1.5 0.5 -95 -115 -135 Tuning Sensitivity Harmonic Output Frequency Pushing Frequency Pulling Tune Input Capacitance Supply Voltage (VCC) Supply Current (ICC) VCO oscillates (Non Harmonic spurious < -70dBc) VCC = +5.25V ± 0.25V 1.5:1 VSWR load, all phases MHz/V dBc MHz/V MHz pF V mA +4.75 -10 3.0 3.0 50 +5.00 15 +5.25 30 1. All specification limits are indicated values over the temperature range –40C to 85C. 2. See Absolute Maximum Ratings for operating temperature. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAVC-010000-002196 VCO, SMT 2146-2246 MHz Absolute Maximum Ratings TA = +25°C Parameter Supply Voltage (VCC) Operating Temperature Storage Temperature Solder Assembly Temperature Rev. Preliminary Ordering Information Part Number MAVC-010000-002196 1. See application note M513. Absolute Maximum 4.5V to 5.5 V -40°C to +85°C -45°C to +120°C See App Note M2032 Package Tape and Reel (500/Reel) 1 Environmental Specifications Devices are designed to function after exposure to vibration, thermal shock and moisture conditions. See MVS Qual Report for details of tests performed. 1. Operation of this device above any one of these parameters may cause permanent damage. Recommended PCB Layout 1. 2. 3. Tolerance: ±0.1mm View is shown from top of device. Solder masked areas to be left clear. These areas may have active vias. Note: Dimensions in Millimetres. (Inch dimensions for reference only). Outline Drawing 1. 2. 3. 4. 5. Plating: Au, 0.05μm — 0.15μm over Ni barrier of 2.5μm — 5.0μm. Internal Solder: Sn95.5/Ag4.0/Cu0.5, lead free. Substrate: FR4 Cover: mild steel Tolerance: ±0.2mm unless otherwise noted. ECO History Rev Prel 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Date 16th April 2008 Created data sheet Description By AC