MAVR-044767-12790T

MA44700 Series Surface Mount Low Power Step Recovery Diodes Rev. V5 Features • • • • • • Surface Mount Packages (SOT-23,SC-79) Low transition times SPC Process for Superior C-V Repeatability Tape and Reel Packaging Designed for Commercial Wireless Applications Also Offering RoHS Compliant Equivalent Parts Absolute Maximum Ratings 1,2 @ TA=+25 °C (Unless Otherwise Noted) Parameter Operating Temperature Storage Temperature Reverse Voltage Forward Bias Current Power Dissipation Absolute Maximum -65 °C to +125 °C -65 °C to +125 °C 30V 50 mA 250 mW Description The MA44700 series of Step Recovery diodes is designed for use in low power multipliers with output frequencies of up to 5 GHz. These Step Recovery diodes generate harmonics by storing a charge as the diode is driven to forward conductance by the positive voltage of the input signal. When the signal reverses polarity, this charge is extracted. The Step Recovery diode will appear as a low impedance currentsource until all the charge is extracted, then it will “snap” to a higher impedance. This causes a voltage pulse to form in the impulse circuit of the multiplier. Step Recovery diodes make excellent high order multipliers such as comb generators. They are also useful as efficient moderate power X2-X4 multipliers. 1. Operation of this device above any one of these parameters may cause permanent damage. 2. Please refer to application note M538 for surface mounting instructions Typical Capacitance vs. Bias (V) freq=1MHz 8 7 6 MA44768 MA44769 MA44767 Capacitance (pF) 5 4 3 2 1 0 0 5 10 15 20 25 30 Applications The MA44700 series step recovery are useful for surface mount low power applications. Bias(V) CT2 Part Number (non-RoHS)1 RoHS Compliant Part Numbers1 (pF) f=1 MHz, VR=6.0 V Min. Max. MA44767-287T MA44768-287T MA44769-287T 1. 2. 1 MAVR-044767-0287AT MAVR-044767-12790T MAVR-044768-0287AT MAVR-044768-12790T MA144769-287T MAVR-044769-12790T 3.0 1.6 0.8 4.5 2.4 1.2 Reverse Voltage (V) Nominal Carrier Transition Time Nominal Input Nominal Output (nS) Ir =10 uA Min. 30 30 30 (pS) Max 600 250 150 (GHz) (GHz) Typical 250-500 75-225 20-50 0.05-5 0.1-1 0.1-1 0.5-1.5 0.5-2.5 1-5 The prefix defines package style, configuration and packaging information. Contact representative for complete part identification. Capacitance @ 1 MHz ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA44700 Series Surface Mount Low Power Step Recovery Diodes Rev. V5 Case Styles SOT-23 (Case Style 287) F D A N SOT-23 (Case Style 287) DIM. A B C D E F G H J K L INCHES MIN. MAX. ⎯ 0.048 0.008 ⎯ 0.040 ⎯ 0.013 0.020 0.003 0.006 0.110 0.119 0.047 0.056 0.037 typical 0.075 typical 0.103 ⎯ 0.024 ⎯ MILLIMETERS MIN. MAX. ⎯ 1.22 0.20 ⎯ 1.00 ⎯ 0.35 0.50 0.08 0.15 2.80 3.00 1.20 1.40 0.95 typical 1.90 typical 2.60 ⎯ 0.60 ⎯ M G B K L H J C E DIM. M N GRADIENT 10° max. 2° . . .30° SC-79 (Case Style 1279) Topview Cathode Mark B 10° Max Seating Plane F E SC-79 (Case Style 1279) DIM. A B C D E F G H INCHES MIN. MAX. 0.020 0.003 0.006 0.010 0.059 0.043 0.011 0.037 typical 0.028 0.008 0.010 0.014 0.067 0.051 0.012 0.043 MILLIMETERS MIN. MAX. 0.50 0.08 0.15 0.25 0.08 1.50 0.28 0.94 0.71 0.20 0.25 0.36 0.15 1.30 0.30 1.09 C D A 10° Max G H 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA44700 Series Surface Mount Low Power Step Recovery Diodes Rev. V5 Mounting Information The illustration indicates the recommended mounting pad configuration for the SOT-23 and SC-79 packages. Solder paste containing flux should be screened onto the pads to a thickness of 0.0050.007 inches. The plastic package is placed in position, firmly adhering to the solder paste. Permanent attachment is performed by a reflow soldering procedure during which the tab temperature does not exceed +275 °C and the body temperature does not exceed +250 °C, for standard models and +260 °C for the RoHS compliant devices. Please refer to Application Note M538 for surface mounting instructions. SOT-23 .030 min. 0.80 .035 min. 0.90 .037 0.95 0.75 1.9 .090 2.2 Dimenstions: inches mm SC-79 0.020 0.50 0.020 0.50 0.053 1.35 Dimenstions: inches mm Package Configuration SOT-23 (Case Style 287) SC-79 (Case Style 1279) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.