MTH-50

MTH-50 / MTV-50 Two-Way Power Dividers, 1 - 100 MHz and 40 - 400 MHz Features • • • • • Ideal for High Density Packaging High Isolation: 30 dB Min. VSWR: 1.3:1 Max. Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1 Watt Max. • Internal Load Dissipation: 0.05 Watts Max. • MIL-STD-883 Screening Available Rev. V3 TO-5-1 Description A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. Pin Configuration Pin No. A B Function Out In Pin No. C Function Out MTH-50 Electrical Specifications1: TA = -55°C to +85°C Parameter Frequency Insertion Loss Isolation Amplitude Balance Phase Balance VSWR Test Conditions — Less Coupling — — — — Frequency 1 - 100 1 - 100 MHz 1 - 100 MHz 1 - 100 MHz 1 - 100 MHz 1 - 100 MHz Units MHz dB dB dB ° Ratio Min — — 30 — — — Typ — — — — — — Max — 0.5 — 0.1 1.0 1.3:1 MTV-50 Electrical Specifications1: TA = -55°C to +85°C Parameter Frequency Insertion Loss Isolation Amplitude Balance Phase Balance VSWR Test Conditions — Less Coupling — — — — Frequency 40 - 400 MHz 40 - 400 MHz 40 - 400 MHz 40 - 400 MHz 40 - 400 MHz 40 - 400 MHz Units MHz dB dB dB ° Ratio Min — — 30 — — — Typ — — — — — — Max — 0.6 — 0.2 2.0 1.3:1 1. All specification apply with 50 ohm source and load impedance. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MTH-50 / MTV-50 Two-Way Power Dividers, 1 - 100 MHz and 40 - 400 MHz Typical Performance Curves Insertion Loss - Ports 2 - 3, 2 - 1 M T H- 50 1.4 M T V - 50 Rev. V3 Isolation - Ports 1 - 3 M T H- 50 80 70 M T V - 50 Insertion Loss (dB) 1.2 Isolation (dB) 1.0 0.8 0.6 0.4 0.2 0 .0 0.5 1 2 5 10 20 50 100 200 300 400 500 600 60 50 40 30 20 10 0.5 1 2 5 10 20 50 100 200 300 400 500 600 F reque nc y ( M H z) F requency (M H z) VSWR M T H- 50 I np ut M T H- 50 O ut p ut 2.8 2.6 2.4 2.2 M T V - 50 Inp ut M T V - 50 O ut p ut Ordering Information Part Number MTH-50 PIN MTV-50 PIN Package TO-5-1 TO-5-1 VSWR 2 1.8 1.6 1.4 1.2 1 0.5 1 2 5 10 20 50 100 200 300 400 500 600 F re que nc y ( M H z) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.