MY63C

MY63 / MY63C Double-Balanced Mixer Rev. V2 Features • • • • • • LO 2.5 TO 7 GHz RF 2.5 TO 5.5 GHz IF DC TO 1.5 GHz LO DRIVE +9 dBm (nominal) LOW NOISE FIGURE 5.8 dB (TYP.) Product Image Description The MY63 is a double balanced mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky ring quad diodes and broadband soft dielectric and ferrite baluns to attain excellent performance. This mixer can also be used as a phase detector and/or bi-phase modulator since the IF port is DC coupled to the diodes. The use of high temperature solder and welded assembly processes used internally makes it ideal for use in manual, semi-automated assembly. Environmental screening available to MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory. Ordering Information Part Number MY63 MY63C Package Versapac SMA Connectorized Electrical Specifications: Z0 = 50Ω Lo = +9 dBm (Downconverter application only) Typical Parameter Test Conditions Units +25ºC -54º to +85ºC Guaranteed SSB Conversion Loss (max) & SSB Noise Figure (max) fR = 3.0 to 5.0 GHz, fL = 3.0 to 5.5 GHz, fI = 0.03 to 0.5 GHz fR = 2.5 to 5.5 GHz, fL = 2.5 to 7.0 GHz, fI = 0.03 to 1.5 GHz dB dB 5.0 5.8 6.0 7.0 6.5 7.5 Isolation, L to R (min) fL = 2.5 to 7 GHz fL = 2.5 to 3.5 GHz fL = 3.5 to 7 GHz fL = +9 dBm fR1 = 4 GHz at –10 dBm, fR2 =4.01 GHz at –10 dBm, fL = 2.8 GHz at = +9 dBm dB dB dB dBm 40 25 30 +2 30 17 20 28 15 18 Isolation, L to I (min) 1 dB Conversion Comp. Input IP3 dBm +11 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MY63 / MY63C Double-Balanced Mixer Rev. V2 Typical Performance Curves 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MY63 / MY63C Double-Balanced Mixer Rev. V2 Absolute Maximum Ratings Parameter Operating Temperature Storage Temperature Peak Input Power Peak Input Current Outline Drawing: Versapac * Absolute Maximum -54ºC to +100ºC -65ºC to +100ºC +23 dBm max @ +25ºC dBm max @ +100ºC 100 mA DC Weight: 6 grams (0.21 oz.) max Outline Drawing: SMA Connectorized * Weight: 12 grams (0.42 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.