SM4T17

SM4T17 Load Insensitive Mixer Rev. V3 Features • • • • • • • LO 1 TO 3400 MHz RF 1 TO 3400 MHz IF 1 TO 2000 MHz LO DRIVE: +17 dBm (NOMINAL) INSENSITIVE TO SYSTEM MISMATCH HIGH INTERCEPT: +24 dBm (TYP.) +260°C REFLOW COMPATIBLE Product Image Description The SM4T17 is a termination insensitive mixer, designed for use in military, wireless and test equipment applications. The design utilizes Schottky bridge quad diodes, broadband ferrite baluns and internal loads to provide excellent performance without degradation due to external VSWR mismatches. Environmental screening available to MIL-STD-883, MIL-STD-202 or MIL-DTL-28837, consult factory. Ordering Information Part Number SM4T17 Package Surface Mount Electrical Specifications: Z0 = 50Ω Lo = +17 dBm (Downconverter application only) Typical Parameter Test Conditions Units +25ºC fR = 0.005 to 1 GHz, fL = 0.005 to 1 GHz, fI = 0.001 to 0.5 GHz fR = 0.001 to 3 GHz, fL = 0.001 to 3 GHz, fI = 0.001 to 1.5 GHz fR = 0.001 to 3.4 GHz, fL = 0.001 to 3.4 GHz, fI = 0.001 to 2 GHz dB dB dB dB fL = 0.01 to 1.5 GHz fL = 0.01 to 3.4 GHz fL = 0.01 to 1.5 GHz fL = 0.01 to 3.4 GHz fR = 0.01 to 3.4 GHz fL = +17 dBm fR1 = 1.9 GHz @ 10 dBm, fR2 = 1.91GHz @ 10 dBm, fL = 2 GHz @ 17 dBm dB dB dB dB dB dBm 40 30 40 30 25 +13 6.5 8.0 9.0 7.5 9.0 10.5 Guaranteed -40º to +85ºC 7.8 9.3 10.8 SSB Conversion Loss (max) SSB Noise Figure Isolation, L to R (min) Within 1 dB of conversion loss 35 25 35 25 34 24 34 24 Isolation, L to I (min) Isolation, R to I (min) 1 dB Conversion Comp. Input IP3 dBm +24 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. SM4T17 Load Insensitive Mixer Rev. V3 Absolute Maximum Ratings Parameter Operating Temperature Storage Temperature Peak Input Power Peak Input Current Outline Drawing: Surface Mount * Absolute Maximum -54ºC to +100ºC -65ºC to +100ºC +27 dBm max @ +25ºC +23 dBm max @ +100ºC 50 mA DC Weight: 2 grams (0.07 oz.) max. ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.