SM4TH

SM4TH Load Insensitive Mixer Rev. V4 Features • • • • • • • • LO 1 TO 3400 MHz RF 1 TO 3400 MHz IF 1 TO 2000 MHz LO DRIVE: +23 dBm (NOMINAL) INSENSITIVE TO SYSTEM MISMATCH HIGH INTERCEPT: +29 dBm (TYP.) AVAILABLE IN SURFACE MOUNT +260°C REFLOW COMPATIBLE Product Image Description The SM4TH is a termination insensitive mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky bridge quad diodes, broadband ferrite baluns and internal loads to provide excellent performance without degradation due to external VSWR mismatches. Environmental screening available to MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory. Ordering Information Part Number SM4TH Package Surface Mount Electrical Specifications: Z0 = 50Ω Lo = +23 dBm (Downconverter application only) Typical Parameter Test Conditions Units +25ºC SSB Conversion Loss (max) & SSB Noise Figure (max) Guaranteed -54º to +85ºC fR = 0.005 to 2.0 GHz, fL = 0.005 to 2.0 GHz, fI = 0.001 to 0.5 GHz fR = 0.001 to 3.4 GHz, fL = 0.001 to 3.4 GHz , fI = 0.001 to 2.0 GHz dB dB 7.0 9.0 8.0 10.5 8.5 11.0 Isolation, L to R (min) Isolation, L to I (min) Isolation, R to I (min) 1 dB Conversion Comp. Input IP3 fL = 0.01 to 1.5 GHz fL = 0.01 to 3.4 GHz fL = 0.01 to 1.5 GHz fL = 0.01 to 3.4 GHz fR = 0.001 to 3.4 GHz fL= +23 dBm fR1 = 2 GHz at 0 dBm, fR2 = 2.01 GHz at 0 dBm, fL = 1.9 GHz at +23 dBm dB dB dB dB dB dBm dBm 35 35 40 35 21 +17 +29 30 22 30 25 29 21 29 24 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. SM4TH Load Insensitive Mixer Rev. V4 Typical Performance Curves Outline Drawing: Surface Mount * Weight: 2 grams (0.07 oz.) max. ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Absolute Maximum Ratings Parameter Operating Temperature Storage Temperature Peak Input Power Peak Input Current Absolute Maximum -54ºC to +100ºC -65ºC to +100ºC +27 dBm max @ +25ºC +23 dBm max @ +100ºC 50 mA DC 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.