SMA515

A515 / SMA515 Cascadable Amplifier 10 to 500 MHz Features • HIGH GAIN: 27.5 dB (TYP.) • LOW NOISE: 3.5 dB (TYP.) • HIGH OUTPUT POWER: +22 dBm (TYP.) Rev. V1 Product Image Description The A515 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This 2 stage bipolar transistor feedback amplifier design displays impressive performance characteristics over a broadband frequency range. An active DC biasing network insures temperature-stable performance. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number A515 SMA515 CA515 Package TO-8 Surface Mount SMA Connectorized Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC Typical Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max) DC Current @ 15 Volts (max) 1 mA Absolute Maximum Ratings Parameter Storage Temperature Case Temperature DC Voltage Continuous Input Power Short Term Input power (1 minute max.) Peak Power (3 µsec max.) “S” Series Burn-In Temperature (case) Guaranteed 0º to 50ºC 5-500 26.5 ±0.5 Units 25ºC MHz dB dB dB dB dBm dBm dBm dBm 3-600 27.5 ±0.3 36 3.5 22.0 +33 +44 +50 1.4:1 / 1.4:1 127 1.7:1 / 1.7:1 135 1.8:1 / 1.8:1 140 4.5 20.5 5.0 20.0 Absolute Maximum -62ºC to +125ºC +110ºC +17 V +13 dBm 50 mW 0.5 W +125ºC -54º to +85ºC* 5-500 26.0 ±0.8 Thermal Data: VCC = +15 VDC Parameter Thermal Resistance θjc Transistor Power Dissipation Pd Junction Temperature Rise Above Case Tjc Rating 150ºC/W 0.36W +55ºC * Over temperature performance limits for part number CA515, guaranteed from 0oC to +50oC only. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. A515 / SMA515 Cascadable Amplifier 10 to 500 MHz Typical Performance Curves @ +25oC Outline Drawing: TO-8 * Rev. V1 Noise Figure Noise Figure dB 5 4 3 2 WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: Surface Mount * 30 50 200 400 600 Frequency - MHz 10 P owe r O utput @ 1 dB Compre ssion Power Out - dBm 23 22 21 20 5 10 50 100 200 300 400 500 600 Frequency - MHz Inte rc e pt P oint - dBm 60 50 WEIGHT: 1 gram (0.04 oz.) max dBc 40 30 20 10 0 5 10 50 100 200 300 400 500 600 700 Fre que nc y - MHz V S WR 2 Outline Drawing: SMA Connectorized * VSWR 1.5 1 5 50 150 250 350 450 600 Frequency (MHz) WEIGHT: 19 grams (0.67 oz.) max 2 ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.