06EDK1

CORCOM Product Guide Enhanced Performance K Series RFI Power Line Filters DK Series DK3 UL Recognized CSA Certified VDE Approved DK1 DK6 DK Series The DK series RFI power line filters are general purpose common mode and differential mode filters with higher performance line-to-line attenuation than the VK series. The E version of the DK series (EDK) has the same high performance line-to-line attenuation while still meeting the very low leakage current requirements of VDE portable equipment and UL544 non-patient care equipment. The V version of the DK series (VDK) has the same high performance in a more cost-effective package for applications without strict leakage current requirements. Specifications Maximum leakage current, each line-to-ground VDK Models @ 120 VAC 60 Hz: .4 mA @ 250 VAC 50 Hz: .7 mA Hipot rating (one minute): line-to-ground line-to-line Operating frequency: Rated voltage (max.): Rated current: 1VDK/1EDK 3VDK/3EDK 6VDK/6EDK 10VDK/10EDK 20VDK/20EDK Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating VDK Models 1A, 3A 6A, 10A, 20A EDK Models 1A, 3A 6A, 10A, 20A .15 18 10 17 10 Frequency-MHz .5 1 5 10 30 22 27 19 40 30 33 25 48 39 45 34 48 44 45 40 EDK Models .22 mA .38 mA 2250 VDC 1450 VDC 50/60 Hz 250 VAC 1A 3A 6A 10A 20A Electrical Schematic LINE LOAD Resistor location for reference only. 30 40 50 40 46 Line-to-line in 50 ohm circuit Current Rating VDK, EDK Models 1A, 3A 6A, 10A, 20A .15 18 20 Frequency-MHz .5 1 5 10 47 43 62 55 60 65 50 60 30 45 55 22 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Enhanced Performance K Series RFI Power Line Filters (Continued) DK Series RFI Power Line Filters Case Styles VDK1/EDK1 E D C 20VDK6 Terminals: No. 8-32 (5) E B D B A C Torque 18± 2 in.lb. Case Dimensions A Part No. 1VDK1, 1EDK1 A (max) B (max) 2.07 52.6 2.07 52.6 2.07 52.6 2.07 52.6 2.07 52.6 2.07 52.6 2.58 65.5 2.58 65.5 C (max) 1.16 29.5 1.16 29.5 1.16 29.5 1.16 29.5 1.32 33.5 1.32 33.5 1.78 45.2 1.78 45.2 D ±.015 ±.38 E (max) 2.81 71.4 2.81 71.4 3.35 85.1 3.35 85.1 3.35 85.1 3.35 85.1 3.35 85.1 3.35 85.1 Typical dimensions: Terminals: .250 [6.35] (5) Holes: .07 [1.8] Dia.(4) Mounting Holes: .188 [4.78] Dia. (2) Slot: .07 x .16 [1.8 x 4.1] VDK3/EDK3 E D Blue Blue B C Brown Brown A Green/Yellow Typical dimensions: Wire Leads: 4.0 [101.6] (Min.) 3.35 85.1 1VDK3, 1EDK3 2.07 52.6 3VDK1, 3EDK1, 3.85 6VDK1, 6EDK1 97.8 3VDK3, 3EDK3, 2.56 6VDK3, 6EDK3 65.0 10VDK1, 3.85 10EDK1 97.8 10VDK3, 2.57 10EDK3 65.3 20VDK1, 3.85 20EDK1 97.8 3.46 20VDK6 87.9 2.375 60.33 2.375 60.33 2.938 74.63 2.938 74.63 2.938 74.63 2.938 74.63 2.938 74.63 2.938 74.63 Mounting Holes: .188 [4.78] Dia. (2) 20VDK1/20EDK1 Part Numbers 01VDK1 01VDK3 03VDK1 03VDK3 06VDK1 06VDK3 10VDK1 10VDK3 20VDK1 20VDK6 C E D B 01EDK1 01EDK3 03EDK1 03EDK3 06EDK1 06EDK3 10EDK1 10EDK3 20EDK1 A Typical dimensions: Holes: .07 [1.8] Dia.(4) Terminals: .250 [6.35] (5) Mounting Holes: .188 [4.78] Dia. (2) Slot: .07 x .16 [1.8 x 4.1] 23 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com