Corcom Product Guide Power Inlet Line Filter for Medical Equipment
Catalog: 1654001 Issue Date: 06.2011
H Series
UL Recognized CSA Certified VDE Approved*
EH8 EH9
EH4 EH1 EH5
H Series
• Minimal leakage current suitable for medical equipment • Two element circuit provides basic EMI attenuation above 1 MHz • Available with an internal ground circuit inductor (C suffix versions) to isolate equipment chassis from power line ground at radio frequencies • Flanged mounting the same as the EC, ED and EF Series • Capacitive output (see EAH, EBH and EJH Series for capacitive input)
Specifications
Maximum leakage current each Line to Ground: @ 120 VAC 60 Hz: 2 A @250 VAC 50 Hz: 5 A Hipot rating (one minute): Line to Ground: Line to Line: Rated Voltage (max.): Operating Frequency: Rated Current: 2250 VDC 1450 VDC 250 VAC 50/60 Hz 3 to 15A*
3
Power Inlet Filters & Power Entry Modules
Ordering Information 3EH1C
Ground Circuit Inductor Omit if none Output Styles Chassis Mount Style 1 – .250 [6.3] spade terminals 3 – Wire leads Power Inlet Style * 4 – .250 [6.3] spade terminals
(back)
Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45
Electrical Schematic
LINE
1
LOAD
Available Part Numbers
3EH1 3EH3 6EH1 6EH3 6EH4 6EH5 10EH4C
*15A versions are tested by Underwriters Laboratories to US and Canadian requirements and are VDE approved at 10A, 250VAC
Note 1: 10EH4C version only
5 – Wire leads (bottom) 8 – Wire leads (back) 9 – .250 [6.3] spade terminals
(bottom)
H Series Leakage current designation E – Low Leakage (
很抱歉,暂时无法提供与“10EH4”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+2.60046
- 30+2.51079
- 100+2.33145
- 500+2.15211
- 1000+2.06244