CORCOM Product Guide High Performance RFI Filters for Switching Power Supplies
G Series
UL Recognized CSA Certified VDE Approved
10EG1/10VG1
6EG1/6VG1
G Series
The G series RFI filters are designed to provide excellent common-mode and differential-mode attenuation for most digital electronic equipment (particularly switching power supplies) over the frequency range of 20kHz to 30MHz. These filters are a size- and cost-effective solution for equipment that must meet the conducted emission limits of EN55022 Level A requirements, as well as FCC Part 15J, Class B. The EG models also meet the very low leakage current requirements for VDE portable equipment as well as (120 volt) UL 544 non-patient medical equipment.
Specifications
Maximum leakage current,each line-to-ground EG Models @ 120 VAC 60 Hz: .30 mA @ 250 VAC 50 Hz: .50 mA Hipot rating (one minute): line-to-ground line-to-line Operating frequency: Rated voltage (max.): Rated current: 6EG1/6VG1 10EG1/10VG1 Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating .01 .05 .07 EG1 06A 6 19 23 8 10 15 10A VG1 06A 4 18 21 10A 5 10 24 Frequency-MHz .1 .15 .5 1 25 18 25 37 29 42 30 50 48 64 56 72 44 65 55 70 5 43 65 53 70 VG Models 1.2 mA 2.0 mA 2250 VDC 1450 VDC 50/60 Hz 250 VAC 6A 10A
Electrical Schematics
6EG & 6VG Models
LINE LOAD
10 30 40 40 60 60 45 45 60 60
Line-to-line in 50 ohm circuit
10EG & 10VG Models
LINE LOAD
Current Rating .01 .05 .07 EG1 06A 4 6 10 10A 5 5 5 VG1 4 7 7 06A 10A 5 5 7
Frequency-MHz 1 .1 .15 .5 24 26 26 26 37 40 39 39 66 65 67 65 75 65 75 60
5 72 60 68 60
10 30 50 50 70 70 55 55 70 70
Resistor location for reference only.
64
Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com
CORCOM Product Guide High Performance RFI Filters for Switching Power Supplies (Continued)
G Series
RFI Power Line Filters
Case Style
EG1 & VG1
Case Dimensions
Part No. 6EG1/VG1 A (max) B (max) 2.15 54.6 2.27 57.7 C (max) 1.56 39.6 1.8 45.7 D
± .015 ± .38
E (max) 3.38 85.8 4.47 113.5
B
3.56 90.4 10EG1/VG1 4.69 119.1
2.938 74.63 4.063 103.2
D E A
C
Typical dimensions: Terminals: .250 [6.35] (5) Holes: .07 [1.8] Dia.(4) Slot: .07 x .16 [1.8 x 4.1] Mounting holes: .188 [4.78] Dia. (2)
Part Numbers
06EG1 10EG1 06VG1 10VG1
65
Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com
